- Тype: 2 Bandwidth
- Woofer: 15"
- Tweeter: 1"
Turbosound iX15 Active Loudspeaker
The Turbosound iX15 is a 1000-Watt powered two-way 15" loudspeaker with built-in Klark Teknik DSP and Bluetooth audio streaming. Designed for portable PA, fixed installations, and stage monitoring, it pairs a 15" low-frequency driver with a 1" titanium dome compression driver for full-range sound from 45 Hz to 20 kHz. The free Turbo Control iOS app adds wireless remote mixing, while the bi-amplified Class-D power stage delivers up to 126 dB SPL in a lightweight fibre glass reinforced composite enclosure.
- 1000-Watt Class-D bi-amplified output delivers clean, room-filling sound with up to 126 dB SPL.
- 15" low-frequency driver with low-mass voice coil pairs with a 1" titanium dome compression driver for full-range response from 45 Hz to 20 kHz.
- Onboard Klark Teknik DSP with music, speech, live, and club presets plus high-pass filter at 80/120 Hz for sub integration.
- Bluetooth stereo streaming and free Turbo Control iOS app let you mix and adjust levels wirelessly from anywhere in the room.
Turbosound iX15 — 1000-Watt Powered 15" Loudspeaker with Klark Teknik DSP
The Turbosound iX15 is a 1000-Watt active two-way 15" loudspeaker built for portable PA, fixed installations, and stage monitoring. A 15" low-frequency driver with low-mass voice coil and a 1" titanium dome compression driver deliver full-range sound from 45 Hz to 20 kHz, reaching up to 126 dB SPL. Klark Teknik DSP and a Class-D bi-amplified power stage give this model its clean character in a lightweight fibre glass reinforced composite enclosure. This powered speaker is the right choice for mobile DJs, houses of worship, and small venues who need Bluetooth streaming and wireless remote control in one cabinet.
What Sets the iX15 Apart in Its Class
Built around a custom-engineered 15" LF driver and 1" titanium dome compression driver, the cabinet uses Klark Teknik's 24-bit DSP to apply intelligent filters, dynamic EQ, and limiting in real time. The free Turbo Control iOS app delivers full wireless remote access, including master/slave pairing for true stereo Bluetooth playback between two cabinets.
Specs That Matter for Live Sound
Every component inside this cabinet is engineered to keep setup fast and the sound consistent across venues.
- Power Output: 1000 W Class-D bi-amplified — bi-amped design drives LF and HF separately for cleaner headroom.
- Frequency Range: 45 Hz – 20 kHz (-3 dB) — full-range response covering vocals, instruments, and playback.
- Max SPL: 126 dB — enough level for crowds of 50–200 people as a standalone PA.
- Inputs: 2 × XLR/TRS combo + Bluetooth — accepts microphones, line sources, and wireless streaming.
- Bluetooth + iOS remote + XLR output give you wireless control and easy daisy-chaining to subs from the stage.
Ideal Users for This Powered Loudspeaker
Mobile DJs running weddings and corporate events will appreciate the Bluetooth streaming and factory-tuned music playback. Houses of worship and small venues benefit from the speech and live DSP presets, plus the dual-angle pole mount that lets the cabinet tilt down toward seated audiences. Solo performers can deploy this model as a stage monitor thanks to the 45° floor angle and rugged powder-coated steel grille.
Frequency Range: 45 Hz - 20 kHz
The frequency response 45 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Woofer: 15"
Thanks to 15" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
EQ: Yes
The product is equipped with an equalizer that allows you to precisely adjust the sound to your personal preferences. With the ability to fine-tune different frequency bands, you can easily enhance or reduce specific frequencies to achieve the ideal audio experience tailored to your individual needs and preferences.
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Power (Watt)
Frequency Range
Woofer
Middle Speaker
Tweeter
Display
Yes
Colour
Black
Housing
Polypropylene
Inputs
USB
No
Outputs
Balanced XLR M
MP3 / Line In
No
AUX IN
No
Microphone Input
Yes
Offer Configuration
Standard offer
Package Contents
Manual, Power Cable
Power Supply
240V
UK/EU Power supply included
No
Height (cm)
71.1
Width (cm)
45
Depth (cm)
38.1
Weight
22,4 kg
Made in
China
All reviews come from verified customers who have purchased a product from us in the past.
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
