Hollyland Lark Max 2 Combo 4-Person Version with Camera RX + USB-C RX Wireless set
Brand: Hollyland
Product code: 1317007
Brand: Hollyland
Product code: 1317007
Hollyland Lark Max 2 Combo 4-Person Version with Camera RX + USB-C RX Wireless set
The Hollyland LARK MAX 2 Combo 4-Person Version is a digital wireless microphone system built for multi-person shoots, pairing four clip-on transmitters with both a camera-mount receiver and a USB-C plug-in receiver. Full-chain 32-bit float audio at 48 kHz runs from the built-in mic through the 2.4 GHz link to your recording device, while each transmitter doubles as a standalone 32-bit float recorder with 8 GB of onboard storage. AI noise cancellation, automatic gain control, and a 340 m line-of-sight range keep four voices clean and consistent on set.
- Four clip-on transmitters with built-in omnidirectional mics, magnetic clips, and furry windshields cover a full interview panel
- Camera-mount and USB-C plug-in receivers let the same kit jump between a mirrorless rig and a USB-C smartphone
- 32-bit float internal recording with 8 GB of onboard storage per transmitter acts as a redundant backup if the wireless link drops
- Up to 11 hours per transmitter and 36 hours of total runtime via the included charging case
Hollyland LARK MAX 2 Combo 4-Person — Multi-Subject Wireless Audio with 32-Bit Float
The Hollyland LARK MAX 2 Combo 4-Person Version is a digital 2.4 GHz wireless microphone system engineered for interviews, podcasts, livestreams, and multi-camera productions where four voices must be captured cleanly in a single take. The combo ships with four ultracompact clip-on transmitters, a camera-mount receiver, and a USB-C plug-in receiver, so the same kit moves between a mirrorless rig and a USB-C smartphone. Built around a 32-bit float / 48 kHz audio chain that runs from the built-in mic through the wireless link to the receiver's USB-C output, the system preserves headroom that 16- and 24-bit workflows routinely lose. This 4-person combo is the right choice for creators who need broadcast-quality, multi-mic capture with built-in redundancy.
Full-Chain 32-Bit Float, AI Noise Cancellation, and Onboard Backup Recording
What separates this kit from typical 2.4 GHz wireless sets is the full-chain 32-bit float pipeline: each transmitter records a 32-bit float backup to its own 8 GB of internal storage, while the receiver outputs 32-bit float or 24-bit digital audio over USB-C, eliminating clipping risk on louder interview subjects. Hollyland's FocalClear Technology focuses on vocal frequencies while suppressing background distractions, and the deep-learning AI noise cancellation offers stepless reduction from 5 to 25 dB. A frame-level timecode generator keeps the on-camera feed and per-transmitter recordings in sync.
Wireless Performance and Audio Resolution
Stable wireless range and high headroom matter more than raw channel count for multi-person shoots. The 2.4 GHz Adaptive Frequency Hopping system keeps latency at 20 ms maximum and pushes line-of-sight range to 340 m, so a four-person roundtable can be miked without dropouts in crowded RF environments.
- Wireless Technology: Digital 2.4 GHz with Adaptive Frequency Hopping — resists interference in conference halls and city streets
- Max Operating Range: 340 m line-of-sight / 70 m non-line-of-sight — covers large venues and outdoor shoots
- Sample Rate / Bit Depth: 48 kHz / 32-bit float (also 48 kHz / 24-bit) — full dynamic range from whisper to peak
- Signal-to-Noise Ratio: ≥ 72 dB — clean, low-noise floor for vocal detail
Transmitter Design and Microphone Specs
Each clip-on transmitter is built to disappear on camera. The 14 g body uses an excimer nano-coated skin-friendly finish and ships with both a hover-clip and a magnetic clip for flexible placement.
- Microphone Type: Built-in omnidirectional, 4 units — picks up voice evenly regardless of head movement
- Frequency Response: 20 Hz – 20 kHz — full-bandwidth capture for music and dialogue
- Maximum SPL: 128 dB — handles loud laughs and energetic speakers without distortion
- Internal Storage: 8 GB per transmitter, up to 14 hours of uncompressed audio — redundant backup if the wireless link drops
Receivers, Battery Life, and Connectivity
Two receivers give the kit genuine cross-platform flexibility. The camera-mount receiver drops onto a hot shoe and outputs via 3.5 mm TRS or USB-C, while the USB-C plug-in receiver connects directly to modern iPhones, iPads, and Android devices.
- Receiver Types: 1× Camera-Mount (24 g) + 1× USB-C Plug-In (5.9 g) — switch between camera and phone without re-pairing
- Audio Channels: 4 — record four separate tracks to camera or phone
- Transmitter Battery Life: approx. 11 hours per charge — covers a full shoot day
- Charging Case Runtime: 36 hours total (≈2.5 full recharges) — extends the kit to multi-day productions
Who Should Buy the Hollyland LARK MAX 2 Combo 4-Person Version
The LARK MAX 2 Combo 4-Person Version is the right choice for podcasters, YouTube creators, wedding videographers, and small production teams who need to mic four on-camera subjects at once without running a mixer. Documentary crews will appreciate the per-transmitter 32-bit float backup recording, which means a dropped signal never costs an interview. Live streamers and corporate presenters benefit from the AI noise cancellation and three-level Automatic Gain Control, which keep voice levels consistent as different speakers take turns. Mobile journalists gain a single kit that works on both a mirrorless camera and a USB-C smartphone, while the 340 m wireless range and 36-hour charging case make it equally at home on a multi-day shoot.
Тype
System
Frequency Band
Frequency Range
Rackmountable
External Antenna
Colour
Working Distance (m)
340
MP3 / Line In
Sensitivity
-37 dBV/Pa
Package Contents
Camera Receiver, Transmitter, USB Receiver, Charging Case, Windshield, USB-C Cable, Magnets, Quick Start Guide
Play Time (hours)
11
Charging Time (Hours)
1.5
Battery Operation
Batteries Included
Yes
Power Supply
Battery
UK/EU Power supply included
No
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
