- System: UHF
- Receiver: Yes
- Transmitter/Microphone: Yes
- Frequency Band: 518,1 - 519,6 MHz, 530,4 - 540,3 MHz, 534,3 - 538,7 MHz, 552,2 - 527,7 MHz
- Frequency Range: 30 Hz - 20 kHz
DNA WM4 Head Set Wireless set
The DNA WM4 Head Set is a professional UHF wireless microphone system built around four headset microphones and bodypack transmitters paired with a single multi-channel receiver. Designed for vocalists, choirs, presenters, and event crews, it delivers stable signal transmission across four independent channels with cardioid dynamic capsules that reject ambient noise. The rack-mountable receiver includes four balanced XLR outputs plus a 6.3 mm jack, and the bodypacks run up to 8 hours on a pair of AA batteries.
- Four-headset wireless rig with one shared receiver — ideal for choirs, panels, and group performances
- UHF transmission across four independent frequency bands for interference-free operation
- Cardioid dynamic capsules with 30 Hz – 20 kHz response capture vocals cleanly while rejecting stage bleed
- Rack-mountable base station with four balanced XLR outputs, individual volume controls, and IR pairing
Wireless UHF Headset System for Multi-Mic Setups
The DNA WM4 Head Set is a four-channel wireless microphone rig built around four headset microphones with bodypack transmitters and one shared UHF receiver. Designed for vocalists, choirs, presenters, and event crews, it delivers stable signal transmission with cardioid dynamic capsules that reject ambient noise. This system is the right choice for venues that need multiple simultaneous wireless channels without crosstalk or complicated setup.
What Sets This Wireless System Apart
Built around Π/4-DQPSK digital modulation with a 48 kHz sampling rate, the system keeps audio latency below 3 ms while maintaining a signal-to-noise ratio above 96 dB. The receiver's IR pairing window syncs each bodypack to its assigned channel in seconds — no manual frequency matching needed. Four balanced XLR outputs and one 6.3 mm jack let the operator route each microphone independently into any mixer or PA.
Wireless Performance and Capsule Specs
Reliable wireless transmission depends on clean frequency allocation, low latency, and capsules that reject unwanted sound.
- System: UHF wireless, four independent channels — runs four headsets simultaneously without interference
- Frequency Bands: 522.2–527.7 MHz / 534.3–538.7 MHz / 518.1–519.6 MHz / 530.4–540.3 MHz — four selectable ranges for clean allocation
- Frequency Response: 30 Hz – 20 kHz — full-range vocal capture from low chest tones to airy highs
- Capsule: Dynamic, cardioid polar pattern — rejects stage bleed and feedback
- Receiver Outputs: 4× balanced XLR, 1× unbalanced 6.3 mm jack — flexible routing into any mixer or PA
- Bodypack Power: 2× AA batteries, up to 8 hours runtime — full event coverage without recharging
Who Should Choose the DNA WM4 Head Set
The DNA WM4 Head Set suits users who need multiple hands-free wireless microphones running at the same time. Worship leaders and choir directors get clean vocal capture across four singers; conference organizers run panel discussions without passing a handheld mic; event companies and karaoke hosts deploy a ready-to-go rig that fits in a single rack slot. Theatre groups and dance instructors also benefit from the headset format, which keeps the mic positioned consistently regardless of head movement.
System: UHF
The UHF (Ultra High Frequency) wireless system operates within a broad frequency range, ensuring stable and reliable sound transmission with minimal interference. The UHF band provides excellent range and strong signal even in challenging conditions, making it ideal for professional applications such as live performances, conferences, or broadcasting.
Frequency Band
- 552,2 - 527,7 MHz
- 534,3 - 538,7 MHz
- 518,1 - 519,6 MHz
- 530,4 - 540,3 MHz
Frequency Range: 30 Hz - 20 kHz
The frequency response 30 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Capsule Type: Dynamic
A dynamic microphone is a type of microphone that works by moving a coil in a magnetic field. This mechanism allows you to capture sound waves and convert them into electrical signals. Dynamic microphones provide a natural and warm sound with excellent handling of loud sound sources such as vocals, drums, or electric instruments. Their directionality usually prevents unwanted ambient sounds from being picked up, which reduces background noise.
Polar Pattern: Cardioid
The cardioid directional microphone is designed to be most sensitive to sounds coming directly from the front and less sensitive to sounds coming from the sides and back. This directional pattern resembles the shape of a heart (hence the name "cardioid") and is ideal for situations where it is necessary to focus on a single sound source and minimize ambient noise.
Rackmountable: Yes
Mounts in a standard rack. This design provides convenient installation and organization of equipment in the studio or on stage, saving space and facilitating access to controls.
Battery Operation: Yes
Battery power provides flexibility and mobility. This feature allows you to use the device anywhere, even in places where an electrical outlet is not available. Battery power is ideal for situations that require portability and independence from the grid, whether you're outdoors, on the road, or in a location with limited access to electricity.
Тype
System
Frequency Band
552,2 - 527,7 MHz, 534,3 - 538,7 MHz, 518,1 - 519,6 MHz, 530,4 - 540,3 MHz
Frequency Range
Capsule Type
Rackmountable
External Antenna
Colour
Working Distance (m)
30
Package Contents
Receiver, Microphone (4 x), Adapter, Transmitter (4 x), Manual, AA Battery (8 x), Cable
UK/EU Power supply included
Yes
Made in
China
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
