- Тype: Quasi 3-Way Active
- Power: 2000 W
- Woofer: 12"
- Tweeter: 1"
- Crossover Frequency: 1,9 kHz
dB Technologies Opera Nona 212 Active Loudspeaker
The dBTechnologies OPERA NONA 212 is a 2000 W peak active point-source PA speaker built around a true coaxial Quasi 3-way acoustic design. Dual 12" woofers paired with a coaxial mid-high driver deliver extended low-end and a controlled 90° × 60° coverage pattern. Onboard DSP with linear-phase FIR filters and eight application presets adapts the cabinet to mains, wedge, or fill duty in seconds.
- True coaxial Quasi 3-way active loudspeaker reaching 132.5 dB max SPL
- Dual 12" ceramic woofers with 2.5" voice coils extend low-frequency response
- 1000 W RMS Class-D amplification (2 × 500 W) with 2000 W peak headroom
- Eight onboard DSP presets cover Full Range, Club, Vocal, Bass Reduction, Playback, Bass Boost, Wedge Vocal, and Wedge Playback modes
Active Point-Source PA Speaker with True Coaxial Quasi 3-Way Design
The dBTechnologies OPERA NONA 212 is a 2000 W peak active point-source loudspeaker for live performance, DJ setups, mobile PA rigs, and fixed installations. Its true coaxial Quasi 3-way acoustic architecture pairs two 12" woofers with a coaxial mid-high driver for coherent sound across the listening area. The dual-woofer configuration provides 28% more LF radiating surface than a single 15" woofer, extending low-frequency presence while keeping the cabinet compact. This model is the right choice for sound providers and musicians who need touring-grade output from a single self-powered enclosure.
What Sets This Loudspeaker Apart
Linear-phase FIR filters drive the onboard DSP, producing coherent, low-latency audio with high intelligibility from every listening position. The coaxial driver arrangement delivers precise 90° × 60° directivity and far greater resistance to feedback than conventional two-way designs. A 1000 W RMS Class-D amplifier with auto-range power supply feeds both woofers and the compression driver, while peak, RMS, and thermal limiters protect the system during demanding shows.
Technical Specifications
- LF Drivers: 2 × 12" woofers with 2.5" voice coils
- HF Driver: 1" exit compression driver with 1.4" voice coil, coaxial with LF section
- Amplification: 1000 W RMS Class-D (2 × 500 W), 2000 W peak
- Max SPL: 132.5 dB
- Frequency Response: 48 – 20,000 Hz (-10 dB) / 52 – 20,000 Hz (-6 dB)
- Directivity: 90° H × 60° V
- DSP: Linear-phase FIR filters with presets for Full Range, Club, Vocal, Bass Reduction, Playback, Bass Boost, Wedge Vocal, and Wedge Playback
- Housing: Polypropylene, 350 × 717 × 371 mm, 22.5 kg
Who This PA Speaker Is For
This model suits touring bands, mobile DJs, houses of worship, and small-to-medium venue operators who want a single cabinet for main PA, stage wedge, or fill duty. Eight onboard DSP presets re-tune the system for spoken word, electronic music, or live instruments without external processing. Two wedge angles, a 36 mm pole mount, and three M10 rigging points cover floor, stand, and suspended deployments, while the 22.5 kg polypropylene enclosure with integrated handles stays manageable for one-person load-in.
Frequency Range: 48 Hz - 20 kHz
The frequency response 48 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 132,5 dB
High SPL levels up to 132,5 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Bi-Amp
Yes
Multifunctional Housing
Yes
Pole Mount
Yes
Speakers
2x 12 "
DSP
Controls
Level (2 x), Preset, Ground/Lift Switch, Input Sensitivity Switch (2 x)
LAN
No
Bluetooth
No
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Colour
Black
Crossover Frequency (kHz)
1.9
Crossover Frequency
1,9 kHz
Housing
Polypropylene
Power RMS (Watt)
1000
Power RMS
1000 W
Sound Pressure Level - SPL (dB)
Sound Pressure Level (SPL)
132,5 dB
Package Quantity (pcs)
1
Battery Operation
No
Batteries Included
No
Mounting
Nest 36 mm, Eye Bolt for Suspension
UK/EU Power supply included
No
Diameter (inch)
12
Diameter
12"
Height (cm)
71.7
Width (cm)
35
Depth (cm)
37.1
Net Weight (kg)
22.5
Weight
22,5 kg
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
