Arturia AudioFuse Studio Rev2 USB Audio Interface
The Arturia AudioFuse Studio Rev2 is a premium 18x20 desktop USB-C audio interface built around four optimized DiscretePRO® preamps with 78 dB of clean gain. It pairs pristine 24-bit / 192 kHz conversion with a full studio feature set: ADAT, S/PDIF, Word Clock, MIDI I/O, an integrated RIAA phono stage, and aptX HD Bluetooth streaming. The unibody aluminum chassis houses two independent headphone outputs, four analog insert points, and a built-in talkback mic for serious tracking sessions.
- Four DiscretePRO® mic preamps with 78 dB gain and -129 dBu EIN capture even the quietest ribbon mics without added noise
- 18 inputs / 20 outputs over USB-C with ADAT (8 channels), S/PDIF, MIDI, and Word Clock for full studio expansion
- Two independent headphone outputs (6.35 mm + 3.5 mm TRS) with dedicated volume and mono/cue switching per artist
- Built-in RIAA phono preamp, talkback mic, speaker A/B switching, and aptX HD Bluetooth receiver for wireless reference tracks
Premium Desktop Audio Interface for the Modern Studio
The Arturia AudioFuse Studio Rev2 is a compact 18x20 USB-C audio interface built around four optimized DiscretePRO® preamps with 78 dB of clean gain and -129 dBu EIN. AD/DA conversion runs at 24-bit / 192 kHz, and a refined clocking system keeps every channel locked tight. The unibody aluminum chassis measures 265 × 160 × 73 mm.
What Sets the Rev2 Apart
An integrated RIAA phono preamp on inputs 5–6 lets you sample vinyl directly into your DAW, while two dedicated reamping outputs feed guitar or bass signals back through an amp for parallel dry/wet capture. The upgraded Bluetooth receiver supports AAC, aptX™, aptX™ HD, and aptX™ Low Latency codecs.
Conversion and Preamps
Each unit ships with an individual DiscretePRO® performance certificate.
- Preamp Count: 4 DiscretePRO® — independent Mic/Line/Instrument circuits per channel
- Maximum Gain: 78 dB — drives quiet ribbon mics without external boost
- Phantom Power: +48 V per channel — powers condenser microphones
- Sample Rate / Bit Depth: 192 kHz / 24 bit
Inputs, Outputs, and Digital Expansion
Eight analog inputs, four analog inserts, six analog outputs, and a full digital section make the Rev2 a true studio hub.
- Analog Inputs: 4 × XLR/TRS combo + 4 × 6.3 mm line (5–6 switchable to phono)
- Analog Outputs: 4 × 6.3 mm TRS line + 2 × Aux/Reamp + 2 × headphone
- Digital I/O: ADAT (8 ch @ 96 kHz), S/PDIF, Word Clock In/Out
- MIDI & USB: MIDI In/Out, USB-C, 3-port USB 2 hub
Monitoring, Control, and Bundled Software
Every key monitoring function lives on the top panel, so the workflow stays hands-on.
- Monitoring Controls: Speaker A/B, Mono, Mute, Dim, PFL per input
- Included Software: AudioFuse Creative Suite: 11 software titles including Analog Lab Intro and Comp DIODE-609
Number of Preamps
Phantom Power
Word Clock
ADAT
Interface
LAN
MIDI Interface
Software
Number of Outputs
20
DA Conversion
AD Conversion
Sample Rate
Bit Depth
24 bit
USB version
2.0
AES/EBU
MADI
Rackmountable
Frequency Range
S/PDIF
USB
Yes
Ethernet
Analogue Inputs
Inputs
Balanced XLR/Jack 6.3 mm Combo (4 x), Bluetooth, Coaxial S/PDIF, Insert (4 x), Jack 6,3 mm TRS (4 x), MIDI IN, Optical (2 x), RCA (2 x), USB-C
Instrument Inputs
Microphone Input
Line Inputs
Line Output
Outputs
Jack 6,3 mm TRS (4 x), Jack 6,3 mm (2 x), Headphone Jack 6,3 mm TRS (2 x), Headphone Jack 3,5 mm TRS (2 x), Optical (2 x), Coaxial S/PDIF, MIDI OUT, USB A (3 x)
Headphone Output
Optical Out
Yes
Package Contents
Power Supply, USB-C to USB-C Cable, USB-C to USB-A Cable, 3,5 mm jack to MIDI adapter (2 x), Quick Start Guide, Registration Card
UK/EU Power supply included
Yes
Length (cm)
16
Width (cm)
26.5
Height (cm)
7.3
Weight
1,6 kg
Weight (g)
1600
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
