Buy this product in a discounted set
- Type: 2 Bandwidth
- Power: 1600 W
- Woofer: 15"
- Tweeter: 1,4"
Mackie SRT215 Active Loudspeaker
The Mackie SRT215 is a 15" 1600W Class-D professional powered loudspeaker built for bands, DJs, singer/songwriters and venues that need clear, powerful sound with minimal setup time. Advanced Impulse DSP and a custom Sym-X Horn deliver full-range audio from 42 Hz to 20 kHz at up to 133 dB SPL, while the built-in 4-channel digital mixer with Bluetooth and the SRT Connect app let you dial in great sound from the stage or the audience.
- 1600W Class-D amplifier drives a 15" woofer and 1.4" polymer compression driver for full-range output at 133 dB SPL
- Advanced Impulse DSP with FIR filtering and time-aligned transducers creates a massive sweet spot across the whole room
- SRT Mix Control 4-channel digital mixer with Bluetooth streaming, 10 user presets and application-specific voicing modes
- Dual-angle pole mount, M10 flypoints and dual-angled cabinet for FOH, stage monitor or flown installation
Mackie SRT215 — 1600W Professional Powered Loudspeaker
The Mackie SRT215 is a 15-inch 1600W professional powered loudspeaker for front-of-house, stage monitoring and installed sound in clubs, houses of worship and performance spaces. A 1600W Class-D amplifier drives a 15" woofer and 1.4" polymer compression driver through a Sym-X Horn, delivering full-range response from 42 Hz to 20 kHz at up to 133 dB SPL. The SRT215 is the right choice for bands, DJs and venues who need one box that handles main PA, monitor duty and Bluetooth playback without external racks.
Advanced Impulse DSP and Sym-X Horn
Mackie's Advanced Impulse DSP uses FIR filtering to measure and reverse the frequency-response and time-domain anomalies each transducer introduces, so the whole room becomes the sweet spot rather than just a narrow seat in front of the speaker. The custom Sym-X Horn is loaded below the HF driver's LF capability, allowing the compression driver to operate at near-maximum efficiency with a symmetrical, flat response at the crossover. Transparent system protection applies multi-band compression to problem frequencies rather than pulling down the whole output.
Key Specs and Player-Facing Parameters
The 1600W amp, 133 dB peak SPL and 90° x 60° coverage mean a pair can cover an audience of around 250, while 42 Hz low-end extension keeps kick drums and bass guitar full without a sub in smaller rooms.
- Amplifier Power: 1600 W Class-D — 1400 W to the woofer, 200 W to the HF driver
- Frequency Response: 42 Hz – 20 kHz — full-range output reaching down to kick-drum territory
- Max SPL: 133 dB — enough volume for small-to-mid venues and mobile DJ gigs
- Inputs: 2x Combo XLR-1/4" + 3.5 mm TRS aux + Bluetooth — mic, instrument and backing tracks from one box
- Built-in Mixer: SRT Mix Control 4-channel digital mixer — 10 user presets, voicing modes, alignment delay up to 30 m
- Wireless Control: SRT Connect iOS/Android app — EQ, levels, presets and linking from the audience
- Weight: 16.8 kg / 37.1 lb — light enough for one-person load-in
Who the Mackie SRT215 Is Built For
The SRT215 is aimed at working bands, mobile DJs, singer/songwriters, houses of worship and small-to-mid venue operators who want one powered speaker that can do main PA, floor monitor and Bluetooth playback without external racks. Solo performers can plug a mic into channel one, a guitar or keyboard into channel two via Hi-Z, and stream backing tracks over Bluetooth — all shaped through the built-in voicing modes and saved as one of 10 user presets. The dual-angle pole mount, M10 flypoints and dual-angled cabinet mean the same box works on a tripod, flown, or angled back as a wedge.
Mackie SRT Series
The SRT Series combines Mackie amplifier and DSP design with modern wireless app control.
Frequency Range: 42 Hz - 20 kHz
The frequency response 42 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 133 dB
High SPL levels up to 133 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Inputs
- Jack 3,5 mm TRS
- Combo (XLR/Jack)
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
EQ: Yes
The product is equipped with an equalizer that allows you to precisely adjust the sound to your personal preferences. With the ability to fine-tune different frequency bands, you can easily enhance or reduce specific frequencies to achieve the ideal audio experience tailored to your individual needs and preferences.
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Type
Bi-Amp
No
Multifunctional Housing
Yes
Pole Mount
Yes
DSP
Controls
Gain (3 x)
EQ
Yes
Bluetooth
Yes
WiFi
No
Microphone
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
Yes
Colour
Black
Bandwidth
2 Bandwidth
Housing
Polypropylene
USB
No
Outputs
XLR
MP3 / Line In
Yes
Microphone Input
Yes
Offer Configuration
Standard offer
Package Contents
Power Cable, Manual
Package Quantity (pcs)
1
Battery Operation
No
Power Supply
230 V, Power Cable
UK/EU Power supply included
Yes
Height (cm)
73.2
Width (cm)
44.7
Depth (cm)
39.1
Net Weight (kg)
16.8
Weight
16,8 kg
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
