- Type: Amplifier
- Power RMS: 120 W
- Power: 120 W
- Inputs: 3-pin Euroblock, 5-pin Euroblock, RCA Stereo, Remote control
- Outputs: 3-pin Euroblock, Euroblock, Speaker OUT
Lab Gruppen CMA1202 Power Amplifier for Installations
The Lab Gruppen CMA1202 is a 2-zone commercial mixer amplifier delivering 2 × 120 W across Low-Z (4/8 Ω) and High-Z (70/100 V) outputs, designed for restaurants, hotels, retail and education venues. Eight mic/line inputs, RCA stereo inputs and Euroblock connectors make it a practical hub for distributed audio installs. Class-D efficiency, Auto Ramp power management and convection cooling keep running costs low in 24/7 environments.
- 2 × 120 W Class-D mixer amplifier with 8 mic/line inputs and per-channel volume control
- Switchable Low-Z (4/8 Ω) and High-Z (70/100 V) outputs with built-in 80 Hz high-pass filter
- Euroblock and RCA connectivity plus RJ45 GPI remote volume control via standard Ethernet cabling
- 1U rack-mountable chassis, convection-cooled and fan-less for silent operation in noise-sensitive spaces
Lab Gruppen CMA1202 Commercial Mixer Amplifier for Distributed Audio
The Lab Gruppen CMA1202 is a 2-zone, 2 × 120 W commercial mixer amplifier built to drive background music and public-address systems in bars, restaurants, retail stores, hotels and education venues. Each output channel is independently configurable for Low-Z (4/8 Ω) or High-Z (70/100 V) loudspeaker lines via rear-panel dipswitches, so a single rack unit feeds both transformer-coupled ceiling speakers and conventional low-impedance cabinets. Auto Ramp circuitry wakes the unit on signal and drops it into standby after 20 minutes of silence to cut energy use.
What Sets the CMA1202 Apart in Commercial Install Amplifiers
Built around Lab Gruppen's direct drive constant power topology, this mixer amplifier maintains output integrity regardless of connected load, eliminating the need for output transformers in many 70/100 V designs. The RJ45 GPI port accepts standard Ethernet cabling to connect the CRC-V Series wall controllers and the LAB.LEVEL tabletop controller, placing volume and source selection wherever staff need them. Convection cooling means no fans to fail or to add mechanical noise to quiet lobbies.
Power, Performance and Connectivity Specifications
Power delivery and signal quality are the headline numbers for any commercial amp, and the CMA1202 is rated for real-world distributed-audio duty rather than short musical peaks. The Class-D output stage delivers clean headroom for speech and program material across both constant-voltage and low-impedance lines.
- Output Power: 2 × 120 W at 4 Ω, 8 Ω, 70 V and 100 V — covers Low-Z and High-Z loudspeaker lines from a single unit
- Frequency Response: 20 Hz – 20 kHz (+0.5/-2 dB) — full-range reproduction for music and intelligible voice paging
- Signal-to-Noise Ratio: > 97 dBA — quiet background for ambient music in lobbies and dining rooms
- THD: < 0.05% at 1/8 rated power — low distortion keeps announcements and music clear at typical operating levels
- Amplifier Class: Class-D — high efficiency reduces heat output and operating cost in always-on installs
Who Should Choose the Lab Gruppen CMA1202
The CMA1202 is the right choice for AV installers and venue operators who need a single amplifier that drives both 70/100 V distributed speaker lines and conventional 4/8 Ω cabinets across two independent zones. System integrators in hospitality, retail and education will appreciate the eight mic/line inputs, 48 V phantom power and per-channel bass/treble shelving EQ, which let staff tune each zone without external processing. Facility managers running 24/7 background music benefit from Auto Ramp standby, convection cooling and the 1U rack chassis that drops into standard 19" enclosures.
Signal to Noise Ratio: 97 dB
Signal to Noise Ratio (SNR) represents the ratio between the useful audio signal and the noise that may occur during playback. A higher SNR value means cleaner sound with less noise. This product achieves an SNR of 97 dB.
THD: < 0,05%
This product features Total Harmonic Distortion (THD) of < 0,05%, ensuring clean and accurate audio output with minimal signal distortion.
Frequency Range: 20 Hz - 20 kHz
The frequency response 20 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Power: 120 W
With power up to 120 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.
Inputs
- 5-pin Euroblock
- 3-pin Euroblock
- RCA Stereo
- Remote control
Outputs
- 3-pin Euroblock
- Euroblock
- Speaker OUT
Rackmountable: Yes
Mounts in a standard rack. This design provides convenient installation and organization of equipment in the studio or on stage, saving space and facilitating access to controls.
Type
THD
< 0,05%
Signal to Noise Ratio
97 dB
Frequency Range
20 Hz - 20 kHz
Power
120 W
Power (Watt)
Rackmountable
Yes
Inputs
3-pin Euroblock (6 x), 5-pin Euroblock (2 x), RCA Stereo (6 x), Remote control (2 x)
Outputs
Euroblock, Speaker OUT, 3-pin Euroblock (2 x)
Microphone Input
Power RMS
120 W
Package Contents
Power Cable
Power Supply
100 - 240 V
UK/EU Power supply included
No
Width (cm)
43.7
Height (cm)
4.4
Depth (cm)
24.8
Net Weight (kg)
3.6
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
