Choose country for shipment delivery

Markbass Little Mark Gen Z H0 1000 Solid-State Bass Amplifier

Product code: 1337531

Markbass Little Mark Gen Z H0 1000 Solid-State Bass Amplifier

Product code: 1337531

The Markbass Little Mark Gen Z H0 1000 is a 1000W solid-state bass amplifier head built for bassists who want stage-ready tone at the twist of a single knob. Its 12-position rotary TONE control delivers four Vintage, four Flat, and four Modern EQ presets, so players can switch between warm old-school curves, pure organic sounds, and scooped modern…
  • Power: 1000 W
  • Number of Channels: 1
  • External FX Loop: Yes
  • Headphone Output: Yes
  • DI Output: Yes

Markbass Little Mark Gen Z H0 1000 Solid-State Bass Amplifier

The Markbass Little Mark Gen Z H0 1000 is a 1000W solid-state bass amplifier head built for bassists who want stage-ready tone at the twist of a single knob. Its 12-position rotary TONE control delivers four Vintage, four Flat, and four Modern EQ presets, so players can switch between warm old-school curves, pure organic sounds, and scooped modern aggression without menu-diving. A proprietary MPT power amp pushes 1000W at 4 ohms and 600W at 8 ohms, while the Smart Glow Input jack lights up to warn of clipping on dark stages. AUX In and Phones Out turn the head into a silent practice and content-creation hub.

  • Solid-state preamp paired with MPT (Mark Proprietary Technology) power section for fast transient response
  • Five analog controls — Gain, Low, High, Volume, DI Level — keep the front panel uncluttered
  • XLR Line Out with Pre/Post EQ and Ground Lift switches for clean FOH or recording feeds
  • 2.6 kg chassis fits a small backline and travels easily between gigs

1000W Bass Amplifier Head with One-Knob Tone Selection

The Markbass Little Mark Gen Z H0 1000 is a single-channel, 1000W solid-state bass amplifier head built for bassists who want record-ready tone without spending the soundcheck tweaking knobs. A 12-position rotary TONE control loads four Vintage, four Flat, and four Modern EQ curves, replicating a studio plug-in workflow on hardware. A solid-state preamp feeds the proprietary MPT power stage, delivering 1000W into 4 ohms and 600W into 8 ohms. The 2.6 kg chassis measures 276 × 258 × 81 mm and slips into a gig bag without dominating the backline.

What Sets the Gen Z H0 Apart

Two design choices make this head stand out in a crowded 1000W category. First, the Smart Glow Input jack lights up when the amp is active and flashes dynamically when the signal starts to clip, giving a visual safety net on dark stages instead of relying on a tiny clip LED buried in a menu. Second, the integrated 3.5 mm AUX In and Phones Out turn the head into a silent practice, content-creation, and backing-track hub — useful for home practice, backstage warm-ups, or tracking through headphones without a separate audio interface.

Power Section — Headroom for the Largest Stages

The MPT power amplifier is engineered specifically for bass frequencies, where transient peaks can demand far more current than the RMS rating suggests.

  • Power Output: 1000W @ 4 Ω / 600W @ 8 Ω — drives a single 4 Ω cabinet or a pair of 8 Ω cabs with authority
  • Power Amp Topology: MPT (Mark Proprietary Technology) — efficiency tuned for bass transients
  • Preamp: Solid State — clean, low-noise front end that pairs with any pickup configuration

EQ & Tone Control — One-Knob Access to Iconic Curves

The EQ section is built around the 12-position rotary TONE control, the heart of the Gen Z philosophy. Players rotate through curated curves, then fine-tune with a two-band analog EQ.

  • TONE Presets: 12 positions — 4 Vintage, 4 Flat, 4 Modern — instant access to warm old-school, pure organic, and scooped aggressive voicings
  • Analog EQ: Low / High — surgical two-band shaping for room acoustics or pickup compensation
  • Front-Panel Controls: Gain, Low, High, Volume, DI Level — five responsive analog knobs keep the workflow uncluttered

Connections — Stage, Studio, and Silent Practice

The I/O layout covers every common bass workflow: instrument input, effects loop, XLR Line Out for FOH, and footswitch jack for hands-free Mute and Boost.

  • Instrument Input: 6.3 mm jack with Smart Glow backlight — visual clip warning on dark stages
  • Effects Loop: Send / Return — integrates outboard compressors, drive pedals, or modulation
  • DI Output: XLR Line Out with Level, Pre/Post EQ, and Ground Lift — clean FOH or recording feed with hum rejection
  • Headphone & AUX: 3.5 mm Phones Out + 3.5 mm AUX In — silent practice and backing-track hub
  • Footswitch: for optional footswitch (not included): Mute / Boost ON/OFF — hands-free control between songs

Who Should Consider This Head

The Gen Z H0 1000 is the right choice for gigging bassists, session players, and content creators who need a 1000W head that goes from case to stage to silent home practice without re-patching. Touring players benefit from the 2.6 kg chassis, the Smart Glow clip indicator, and the XLR DI with Ground Lift for clean FOH feeds on unfamiliar stages. Producers get a built-in AUX In and Phones Out hub for jamming along to backing tracks or laying down ideas through headphones. Players who prefer deep parametric EQ over curated curves may find the 12-preset TONE control limiting, but anyone who values speed, portability, and the classic Markbass transient response will find this head covers most modern bass duties in a single lightweight box.

Power

Power: 1000 W

With power up to 1000 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.

Number of Channels

Number of Channels: 1

This product offers a single channel, making it easy to connect and manage a single audio source. Ideal for simple recording or playback where minimal configuration is required.

External FX Loop

External FX Loop: Yes

The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.

Headphone Output

Headphone Output: Yes

The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.

Footswitch Input Port: Yes

It has a footswitch input that allows you to control various functions of the unit without using your hands. With this feature, you can easily switch effects, channels, or other settings while playing, which is ideal for live performances and smooth control without interrupting your game.

DI Output: Yes

Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.

Controls

  • Pre/Post EQ
  • Gain
  • Low
  • Boost
  • Tone
  • Volume
  • Ground/Lift Switch
  • High
  • Line Out Level

Inputs

  • Footswitch
  • Return
  • Jack 6,3 mm
  • 3,5 mm Jack AUX IN

Outputs

  • Headphone Jack 3,5 mm
  • Speakon
  • Send
  • XLR

Suitability

Type

Bass Amplifier

Features

Number of Channels

1

External FX Loop

Yes

Number of Input Ports

1

Tuner

No

Properties

Power (Watt)

1000

Power

1000 W

Electronics

Solid State

Type of Electronics in the Power Amplifier

MPT (Mark Proprietary Technology)

Impedance

4 Ohm, 8 Ohm

Rackmountable

No

Inputs and Outputs

Headphone Output

Yes

MP3 / Line In

Yes

Footswitch Input Port

Yes

USB

No

DI Output

Yes

Connection for External Speaker

Yes

Line Output

Yes

Inputs

3,5 mm Jack AUX IN, Footswitch, Jack 6,3 mm, Return

Outputs

Speakon, XLR, Send, Headphone Jack 3,5 mm

Acoustics

Power RMS

1000 W

Effects

Built-in Effects

No

Power supply

Battery Operation

No

Power Supply

230 V

Accessory

Incl. Footswitch

No

Dimensions and Weight

Width (cm)

27.6

Depth (cm)

25.8

Height (cm)

8.1

Weight

2,6 kg

Country

Made in

Italy

Documents

Instructions for use
Manufacturer information
Manufacturer:
Markbass Srl
Via Po 52, 66020, San Giovanni Teatino (CH), Italy
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.