Choose country for shipment delivery

FiiO CLASS A Hi-Fi Headphone Preamp Silver

Product code: 1339128

FiiO CLASS A Hi-Fi Headphone Preamp Silver

Product code: 1339128

The FiiO CLASS A Silver is a fully discrete Class A transistor headphone amplifier and Hi-Fi preamplifier with a fully balanced differential architecture, custom 60W toroidal transformer, and 4,000mW + 4,000mW of balanced output power. Designed as the centerpiece of FiiO's retro desktop HiFi system, it pairs Toshiba twin transistors with Sanken…

FiiO CLASS A Hi-Fi Headphone Preamp Silver

The FiiO CLASS A Silver is a fully discrete Class A transistor headphone amplifier and Hi-Fi preamplifier with a fully balanced differential architecture, custom 60W toroidal transformer, and 4,000mW + 4,000mW of balanced output power. Designed as the centerpiece of FiiO's retro desktop HiFi system, it pairs Toshiba twin transistors with Sanken Electric transistors to deliver a warm, analog sound signature with strong dynamic control.

  • Fully balanced differential amplification with 4,000mW + 4,000mW balanced output into 32Ω loads
  • Custom 60W toroidal transformer with copper foil shielding and 20,000μF Nichicon filter capacitor reservoir
  • Five gain levels plus ±10dB independent bass and treble adjustment for headphone matching
  • Comprehensive connectivity: 3.5mm, RCA, 4.4mm balanced, and XLR balanced inputs; 6.35mm, 4.4mm, and 4-pin XLR headphone outputs

FiiO CLASS A Silver — Fully Discrete Class A Headphone Amplifier and Hi-Fi Preamplifier

The FiiO CLASS A Silver is a fully discrete Class A transistor headphone amplifier and Hi-Fi preamplifier built around a fully balanced differential circuit architecture. As the core of FiiO's retro-style desktop HiFi system, it is assembled from individual audio transistors, precision-matched resistors, and carefully selected capacitors, with each channel manually tuned to recreate a pure, warm, natural, and distinctly analog sound signature. The amplifier delivers up to 4,000 mW + 4,000 mW of balanced output power into a 32 Ω load, driving everything from sensitive in-ear monitors to demanding full-size planar magnetics. A 121 dB signal-to-noise ratio and THD+N below 0.00046% provide a remarkably clean and quiet background.

Two Transistor Types in One Amplifier — Toshiba and Sanken

What sets this design apart from typical Class A amplifiers is its hybrid transistor topology: 16 Toshiba twin and complementary audio transistors deliver warm, smooth tone with relaxed low end and engaging vocals, while 8 Sanken Electric audio transistors add precision, speed, and incisive dynamics for confident control during large-scale orchestral and rock passages. The custom 60 W toroidal transformer is purpose-built for the high quiescent current demands of Class A operation, with copper foil shielding on primary and secondary windings, a silicon steel core, and copper enamelled wire windings for low internal resistance and fast transient response.

Power and Amplification Architecture

Class A amplification runs the output transistors in their most linear region at all times, demanding substantial clean power and explaining the amplifier's 3.5 kg mass and dedicated 60 W toroidal transformer. The fully balanced differential architecture provides strong common-mode interference rejection, low distortion, and a spacious soundstage, while the split power supply design delivers independent regulated power to multiple amplification stages for fast transient response.

  • Amplifier Topology: Fully discrete Class A, fully balanced differential — warm analog character with strong interference rejection
  • Balanced Output Power: 4,000 mW + 4,000 mW into 32 Ω — drives demanding planar magnetics and high-impedance dynamics
  • Power Supply: Custom 60 W toroidal transformer with 20,000 μF Nichicon reservoir — clean DC and tight, controlled bass

Audio Performance — Quiet Background, Wide Bandwidth

A quiet signal chain is essential for headphone listening at low volumes, where any noise floor becomes immediately audible. The DC servo feedback circuit continuously monitors and corrects output DC offset, protecting headphones while improving bass response and transparency. With a noise floor below 3.7 μV (A-weighted) and THD+N below 0.00046%, the amplifier preserves micro-detail without adding grain or harshness.

  • Signal-to-Noise Ratio: 121 dB — extremely quiet background for sensitive IEMs
  • Noise Floor: < 3.7 μV (A-weighted) — inaudible self-noise during quiet passages
  • THD+N: < 0.00046% (XLR output, 1 kHz / -2 dBV @ 10 kΩ) — clean, uncolored signal preservation
  • Frequency Response: 20 Hz to 95 kHz (-3 dB) — extends well beyond the audible range

Connectivity and Control — Pairing With Any Source and Headphone

Five selectable gain levels (Low, Medium, High, Super High, Ultra High) match the amplifier to anything from a sensitive custom in-ear to a high-impedance studio dynamic, while ±10 dB independent bass and treble tone controls allow fine-tuning without leaving the listening position. The 12 V trigger input and output link the unit with upstream sources and downstream power amplifiers for one-touch system power-on.

  • Inputs: 3.5 mm, RCA, 4.4 mm balanced, XLR balanced — pairs with any source component
  • Headphone Outputs: 6.35 mm, 4.4 mm balanced, 4-pin XLR balanced — covers every common headphone termination
  • Preamplifier Outputs: RCA and XLR balanced — drives power amplifiers or active speakers
  • Gain Levels: 5 (Low / Medium / High / Super High / Ultra High) — matches sensitive IEMs to high-impedance dynamics

Who Should Consider the FiiO CLASS A Silver

This amplifier is the right choice for desktop audiophiles who want the warm, engaging musical character of a true Class A amplifier without sacrificing the dynamic authority and low-noise performance needed for high-end headphones. It suits listeners running a mix of sensitive in-ear monitors and demanding full-size planar magnetics from a single source, where the five gain levels and balanced output stages eliminate the need for multiple amplifiers. Studio professionals will appreciate the XLR balanced signal path, the DC servo protection, and the preamplifier outputs that feed a separate power amplifier or active monitors. Home HiFi enthusiasts benefit from the 12 V trigger integration, the matching retro design language with other FiiO desktop components, and the comprehensive protection circuitry that monitors thermal, overload, DC, and overvoltage conditions in real time.

FiiO — Desktop HiFi Designed Around the Listening Desk

FiiO has built its reputation on portable audio players and DAC/amp combinations, and this model represents the brand's commitment to a coordinated desktop HiFi system where every component shares a unified size and design language. The retro-inspired chassis houses a fully discrete transistor topology that the brand describes as a return to the warmth of the analog era, paired with modern protection circuitry and a USB-C firmware update port for long-term serviceability. As the core headphone amplifier in this desktop family, the unit anchors a complete listening setup from source to amplification.

Suitability

Type

Headphone Amp, Hi-Fi Preamplifier

Features

THD

0,0006%

Controls

Volume, Input, Gain, Bass, Treble

Bluetooth

No

DA Conversion

No

Properties

Colour

Silver

Signal to Noise Ratio

121 dB

Frequency Response

20 Hz - 20 kHz

Inputs and Outputs

Analogue Inputs

Yes

Analogue Outputs

Yes

Headphone Output

Yes

Package
Power supply

Battery Operation

No

Power Supply

230 V

Dimensions and Weight

Height (cm)

6.7

Width (cm)

21.3

Depth (cm)

23.9

Weight (g)

3500

Country

Made in

China

Documents

Instructions for use
Manufacturer information
Manufacturer:
Guangzhou FiiO Electronics Technology Co., Ltd.
No.21 Longliang Road, Xialiang Village, Longgui Street, Baiyun District, 510540, Guangzhou,Guangdong, China
Responsible person:
FiiO
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.