ART SPLIT MIX 4DI-Box/Splitter Product code: SPLITMIX4 Four-channel fully passive hybrid mixer/splitter with 4 stereo input channels and 1 stereo output that offers a wide variety of configurations: it allows mixing of 4 stereo input channels down to 1 stereo output, splitting a stereo input signal to distribute 4 stereo output channels, or combining of the configurations for a wide range of applications. It can even be configured as 4 stereo input channels thru independent level attenuators to 4 stereo output channels. All 1/4" connections are stereo TRS and have intelligent switching. Mixer also provides stereo level control on each channel, while level attenuators offer over 90 dB of attenuation and channel isolation. Stereo or mono operation is determined by the type of 1/4" plug and cabling. Fully passive design has no active circuitry to add noise or distortion, and handles virtually any signal level. Dimensions: 47 x 117 x 104 mm. Weight: 380 g.In stock for online shop 3 pcs
ART dPDB Dual passive Di-BoxDI-Box/Splitter Product code: DPDB Dual passive direct box that features two high-quality direct boxes in one portable, rock solid enclosure, and can be used for variety of applications: electric and bass guitar pickup output signals, keyboard and line level signals, DJ console output signals, or speaker level signals. It provides a connection between outputs of electronic musical instrument or other audio sources to the balanced inputs of mixer consoles or other balanced inputs; or connection of a music source to an instrument amplifier while simultaneously patching it to a mixer. Direct box features switchable Input Attenuation (0 dB, -20 dB, -40 dB), a 50 kOhm instrument input, 50 kOhm parallel link jack, a 600 Ohm XLR output jack, and a switchable ground lift. It excels at impedance matching and improving the sound of any instrument plugged into it. Frequency response: 10 Hz-50 kHz +/-0.5 dB @ +4 dBu. Dimensions: 146 x 127 x 51 mm.In stock for online shop 5 pcs
ART DUALXDirectDI-Box/Splitter Product code: ART-DUALXDIRECT Dual reamping direct box. The DUALXDirect provides two independent high quality active interfaces that let you connect instrument, line, or speaker level signals to a mixer or other balanced inputs. Each of the high impedance 6,35 mm and XLR inputs are buffered and converted by very low noise active electronics into an isolated, balanced, low impedance signal output. The DUALXDirect has an extremely flat and wide frequency response and can handle high signal levels. This gives the DUALXDirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments. Frequency response: 10 Hz - 100 kHz. Dimensions: 47 x 117 x 99 mm. Weight: 0,38 kg.In stock for online shop more than 5 pcs
ART DUALZDirectDI-Box/Splitter Product code: DUALZDIRECTIn stock for online shop more than 5 pcs
ART dADB Dual Active Direct BoxDI-Box/Splitter Product code: DADB Compact dual active direct box that acts as two independent, high quality active interfaces for connecting instrument, line, or speaker level signals to balanced inputs and delivers an extremely flat and wide frequency response even at high input levels. The high impedance 6.3mm inputs are buffered and converted by extremely low noise active electronics to deliver isolated, balanced, low impedance outputs. Input attenuation on each channel allows for a wide range of source signal levels. Independent parallel thru jacks allow for tapping the signal chains. A Ground Lift on each channel allows for totally separate the input and output signal grounds to isolate two systems when required, thus reducing hum and ground-loop noise. Switchable low pass Bessel filters eliminate high frequency interference. Operating outside of the audio range these complex and effective filter circuits are primarily intended to eliminate radio frequency interference before it gets into the main system. They also effectively reduce digital computer noise making it the ideal DI solution for laptops, computer workstations and peripherals when used in stereo PA applications. The unit’s active circuitry is powered by phantom power or by an internal 9V battery when external power is not available. Low current draw (less than 7.5 mA) should provide more than 100 hours of operation with a new battery (alkaline recommended). The compact black all steel case and active design ensure unmatched long-term reliability in live sound, permanent/fixed installations, DJ applications, or virtually any PA application. Dimensions: 51 x 127 x 146 mm. Weight: 1.22 kg.In stock for online shop 1 pcs
DI-Box/Splitter / Product code: DTI / ID: 15576
ART DTI:dimensions 44.5mm x 107mm x 89mm, Input Connections: XLR female balanced, unbalanced, and RCA type phono jacks, Output Connection: XLR male balanced, thereby isolating two systems and reducing hum and ground-loop noise. The DTI's audio transformers have an extremely flat and wide frequency response and can handle high signal levels while maintaining an isolated balanced output. This gives the DTI a very clean and neutral sound with a wide variety of signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 Ohms to 100 kOhms, totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, and RCA type phono jacks, unbalanced, 1/4" TRS, 1/4" TRS, Weight 0,34 kg
Product rating:ART DTI
Do you own ART DTI, or have you had a chance to try it?
Write a review and share your opinion with others
12. 4. 2018: 50Hz hum eliminálva. :)
20. 12. 2017: Dobrý, jednoduchý, variabilní.