Palmer PWT 08Power Supply Adapter Product code: PWT08 Pedalboard Power Supply 8 Outputs. Stable 2000 mA 9V for eight center negative outlets. Two of these are switchable to 9, 12 or 18 volts, and with the included Y cable they can be combined to a single outlet for 21, 24, 30 or 36 volts maximum output. Robust steel housing. Dimensions: 140 x 80 x 32 mm. Weight: 0,3 kg.In stock for online shop 2 pcs
T-Rex FuelTank JuniorPower Supply Adapter Product code: FUELTANK-JUNIOR Fuel Tank Junior is a lean, mean power supply that will handle virtually any 9-Volt effects pedal – and then some. It features 5 isolated outputs that deliver clean, quiet power to your pedals. And it’s switchable between 115 and 230V, so you can use it worldwide. Don’t let the compact size of this unit fool you – Fuel Tank Junior is a real powerhouse!FeaturesVoltage selector, 115/230 volts5 x 9VDC isolated outputs (120 mA each).In stock for online shop 4 pcs
RockBoard Power PitPower Supply Adapter Product code: RBO-POWER-PIT Versatile multi power supply for effect pedals that delivers 4 x 9V outs (500 mA total), 3 outs with adjustable voltage (7.9V-9.4V) for battery simulation, and another 1 out with adjustable voltage (9, 12, 15, 18V). In addition, there is one out for mains plug to supply further devices. The user can overview the voltage adjustments via display and adjust the load-dependent voltage (LDV) controls for simulating battery behaviour. The power supply also features an exchangeable protection fuse and works with input voltage of 110V-240V which makes it an ideal device for touring. Also included is an Allen key for adjusting LDV (2mm, L hex wrench); 8 power cables for effect devices with 2.1mm barrel plugs, each with angled and straight end, 50cm long; IEC power cables (wall socket to IEC female); and spare fuses (4 x 500mA, 250V). Dimensions: 170 x 90 x 50 mm (including feet). Weight: 910 g.In stock for online shop 2 pcs
Palmer PWT 05 MK 2Power Supply Adapter Product code: PWT05MKII Pedalboard Power Supply 5 Outputs. Stable 250 mA 9V on each of the five center negative outlets. To deliver clean DC power to your pedals and eliminate ground loops between them and the associated hum the outlets are isolated. Controls: mains switch (on/off), voltage selector switch. Robust steel housing. Powered by 9 V DC power supply. Dimensions: 140 x 10 5x 45 mm. Weight: 1,5 kgIn stock for online shop 1 pcs
Joyo JP-04 Power SupplyPower Supply Adapter Product code: JP-04 Have you ever found the strange noises jumping out of nowhere when using several pedals together? The biggest reason that produces such annoying sound is that pedals are connected in a parallel mode. With such parallel connection, each pedal forms a ground loop, which brings the noises from other magnetic fields into the signal path and all the other pedals are interfered and become unstable. To solve this problem, all need to do is to get rid of the ground loop and make sure each pedal work in an independent route and most importantly choose a power supply with real independent output free from ground loop troubles. Well, here is JOYO JP-04 right made for you! JOYO JP-04 is an isolated power supply available for guitar pedals. It uses a high quality R transformer. It has eight 9V outputs with independent power cable and ground wire, each output is completely isolated, short-circuits and over current protected, highly filtered and regulated, This ensures reliable operation, free of hum and noise. It will provide you a clean and transparent sound. The JP-04 isolated power supply could be working on the pedal board without any problems because of its small size, and to greatly save your space on the board we have also made a pedal board named "RD-B2" specially, with its mounting space big enough for power supply JP-04 underneath and the hollow slatted design makes it easy to run cables and work perfectly.In stock for online shop 10 pcs
Product rating:Yamaha PA 10 S
Do you own Yamaha PA 10 S, or have you had a chance to try it?
Write a review and share your opinion with others