Neumann KH 120 D
Product code: KH-120-D | ID: 230994
100 Hz\r\nMax. SPL in full space / calc. in half space at 3% THD at 1m\t105.1 / 111.1 dB SPL (averaged between 100 Hz and 6 kHz)\r\nBass capability: Max. SPL in half space at 3% THD at 1m\t104.8 dB SPL (averaged between 50 Hz and 100 Hz)\r\nMax. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions\t107 dB(C) SPL\r\nMax. short term SPL with music material at 2.3 m, in typical listening conditions (pair) 97 dB(C) SPL (full range) 104 dB(C) SPL (with subwoofer)\r\nMax. long term SPL with pink noise at 2.3 m, in typical listening conditions (single/pair) 88 / 93 dB(C) SPL (full range) 89 / 94 dB(C) SPL (with subwoofer)\r\nElectronics\t\r\nWoofer amplifier, \r\ncont.(peak) output power* 50 W (80 W)\r\nTweeter amplifier, \r\ncont.(peak) output power* 50 W (80 W)\r\nController design\tAnalog, active\r\nCrossover Frequency 2.0 kHz\r\nCrossover Slope (dB/oct.) 24, 4th order\r\nEqualization - Bass 0, \u22122.5, \u22125, \u22127.5 dB\r\nEqualization - Mid\t0, \u22121.5, \u22123, \u22124.5 dB\r\nEqualization - High +1, 0, \u22121, \u22122 dB\r\nProtection circuitry Limiter: low, high\r\nInfrasonic filter frequency; slope 30 Hz; 6 dB/oct.\r\nAnalog Input\r\nImpedance, electrically balanced\t\r\n10k Ohms in position 94/108 dB SPL at 1 m\r\n20k Ohms in position 100/114 dB SPL at 1 m\r\nDigital Input/Output\t\r\nFormat BNC\tAES3, S/P-DIF\r\nImpedance BNC, unbalanced 75 \u03a9 (input/output)\r\nInput switching Analog, Digital A, Digital B, Digital A+B (all available with and without delay)\r\nDigital converter: resolution, design 16 \u2026 24-bit DAC, \u0394\u2211\r\nDigital converter: sampling rate 32 \u2026 192 kHz\r\nDigital sensitivity \u221218 dBFS\r\nD-A dynamic range 120 dB\r\nAudio-Video/lip sync and Time-of-Flight delay range 0 \u2026 409.5 ms\r\nAudio-Video/lip sync max. frames 0 \u2026 10.2 (40 ms) frames, \r\n0 \u2026 12.3 (33 ms) frames\r\nResolution: time/distance 0.1 ms / 3.4 cm (1 3/8\u201d)\r\nLatency D-A (A-D-A)\t0.22 - 1.85 ms (0.54 ms)\r\nDisplays and indicators - power on Neumann logo \u201cWhite\u201d\r\nDisplays and indicators - limit/clip Neumann logo \u201cRed\u201d\r\nDisplays and indicators - digital error\tNeumann logo \u201cRed\u201d flash\r\n"}" data-sheets-userformat="{"2":513,"3":{"1":0},"12":0}">The KH 120 D studio monitor is designed for use as a near-field loudspeaker or as a rear loudspeaker in larger multi-channel systems. The KH 120 D represents the latest in acoustic and electronic simulation and measurement technologies to ensure the most accurate sound reproduction possible. It has a Mathematically Modeled Dispersion waveguide (MMD ), flexible acoustical controls, analog class-AB amplifiers, various input formats (analog and digital) and an extensive mounting hardware range. All of this provides the user with the maximum versatility over a wide variety of acoustic conditions, source equipment, and physical locations. The KH 120 D is perfect for tracking, mixing and mastering in music, broadcast, project and post-production studios. Color: Black
Specs
Acoustics
Free field frequency response 52 Hz … 21 kHz, ± 3 dB
Pass band free field frequency response 54 Hz … 20 kHz, ± 2 dB
Self-generated noise (with input gain set to 100 dB for 0 dBu) <
20 dB(A) at 10 cm Total harmonic distortion < 0.5 % at 95 dB SPL at 1
m > 100 Hz
Max. SPL in full space / calc. in half space at 3% THD at 1m 105.1 / 111.1 dB SPL (averaged between 100 Hz and 6 kHz)
Bass capability: Max. SPL in half space at 3% THD at 1m 104.8 dB SPL (averaged between 50 Hz and 100 Hz)
Max. short term SPL with IEC-weighted noise (IEC 60268-5) at 1 m, in typical listening conditions 107 dB(C) SPL
Max. short term SPL with music material at 2.3 m, in typical
listening conditions (pair) 97 dB(C) SPL (full range) 104 dB(C) SPL
(with subwoofer)
Max. long term SPL with pink noise at 2.3 m, in typical listening
conditions (single/pair) 88 / 93 dB(C) SPL (full range) 89 / 94 dB(C)
SPL (with subwoofer)
Electronics
Woofer amplifier,
cont.(peak) output power* 50 W (80 W)
Tweeter amplifier,
cont.(peak) output power* 50 W (80 W)
Controller design Analog, active
Crossover Frequency 2.0 kHz
Crossover Slope (dB/oct.) 24, 4th order
Equalization - Bass 0, −2.5, −5, −7.5 dB
Equalization - Mid 0, −1.5, −3, −4.5 dB
Equalization - High +1, 0, −1, −2 dB
Protection circuitry Limiter: low, high
Infrasonic filter frequency; slope 30 Hz; 6 dB/oct.
Analog Input
Impedance, electrically balanced
10k Ohms in position 94/108 dB SPL at 1 m
20k Ohms in position 100/114 dB SPL at 1 m
Digital Input/Output
Format BNC AES3, S/P-DIF
Impedance BNC, unbalanced 75 Ω (input/output)
Input switching Analog, Digital A, Digital B, Digital A+B (all available with and without delay)
Digital converter: resolution, design 16 … 24-bit DAC, Δ∑
Digital converter: sampling rate 32 … 192 kHz
Digital sensitivity −18 dBFS
D-A dynamic range 120 dB
Audio-Video/lip sync and Time-of-Flight delay range 0 … 409.5 ms
Audio-Video/lip sync max. frames 0 … 10.2 (40 ms) frames,
0 … 12.3 (33 ms) frames
Resolution: time/distance 0.1 ms / 3.4 cm (1 3/8”)
Latency D-A (A-D-A) 0.22 - 1.85 ms (0.54 ms)
Displays and indicators - power on Neumann logo “White”
Displays and indicators - limit/clip Neumann logo “Red”
Displays and indicators - digital error Neumann logo “Red” flash
Parameters and specifications
Type
LF Driver Power Amp
50W
HF Driver Power Amp
50W
EQ
Frequency Range
Woofer
Tweeter
Power
Bass Reflex Port
Crossover Frequency (kHz)
Colour
Inputs
Sound Pressure Level - SPL (dB)
Amplification configuration
Sound Pressure Level (SPL)
Package Quantity (pcs)
Package Contents
Manual, Power Cable
Power (Watt)
Power Supply
240V
UK/EU Power supply included
Yes
Width (cm)
18,2
Depth (cm)
22
Height (cm)
27,7
Net Weight (kg)
6,2
Made in
Germany
Recommended accessories
Overall score based on 3 user reviews: