Choose country for shipment delivery

XVive T9 Transparent Ear Loop headphones

Product code: 1188708

XVive T9 Transparent Ear Loop headphones

Product code: 1188708

Ear Loop headphones XVive T9 Transparent Ear Loop headphones

XVive T9 Transparent Ear Loop headphones

£182.85
The Xvive T9 In-Ear Monitor brings pro-level dual-driver sound to working musicians at an accessible price. Two Knowles balanced-armature drivers per side — a mid-bass unit and a custom-tuned micro tweeter — feed a custom unified crossover for clean, detailed audio. The closed-back, sound-isolating shell blocks stage bleed so users can monitor...
  • Construction Method: Closed
  • Active noise cancellation: No
  • Sensitivity (dB): 120
  • Frequency Range: 20 Hz - 16,5 kHz
  • Impedance: 59 Ohm

XVive T9 Transparent Ear Loop headphones

The Xvive T9 In-Ear Monitor brings pro-level dual-driver sound to working musicians at an accessible price. Two Knowles balanced-armature drivers per side — a mid-bass unit and a custom-tuned micro tweeter — feed a custom unified crossover for clean, detailed audio. The closed-back, sound-isolating shell blocks stage bleed so users can monitor at moderate volumes.

  • Dual Knowles balanced-armature drivers with custom crossover deliver balanced, detailed sound
  • Closed-back sound-isolating design blocks ambient noise on stage and in the studio
  • 120 cm detachable cable with 3.5 mm jack and included 6.3 mm adapter works with any wireless beltpack or audio interface
  • Comes with hardshell carrying case, cleaning tool, and ear tips in three sizes (silicone + memory foam)

Xvive T9 In-Ear Monitor — Pro-Level Sound at an Accessible Price

The Xvive T9 In-Ear Monitor is a dual-driver IEM designed in the USA to deliver balanced, detailed audio once reserved for custom-molded units. Two Knowles balanced-armature drivers per side — a powerful mid-bass unit and a custom-tuned micro tweeter — are joined by a custom unified crossover for clean separation. A closed-back, sound-isolating shell blocks stage bleed so musicians can monitor at moderate volumes without fatigue.

What Sets the T9 Apart

Inside each earpiece, separate acoustic tubes route low and high frequencies directly into the listener's ear rather than mixing inside the housing. The replaceable cable routes over the ear for a stable fit during long sets, and color-coded silicone tips (red and yellow for left/right) plus memory foam options make finding a seal straightforward. The T9 is also the wired half of the Xvive U4T9 wireless bundle.

Technical Parameters — Sound, Fit, and Connectivity

Specs that matter on stage and in the studio.

  • Frequency Response: 20 Hz – 16.5 kHz (±3 dB) — covers bass, vocals, and cymbals without artificial hype
  • Impedance: 59 ohms @ 1 kHz — pairs cleanly with wireless beltpacks and headphone outputs
  • Sensitivity: 120 dB @ 1 kHz — reaches monitoring volume without pushing source levels
  • Drivers: Dual Knowles balanced-armature (mid-bass + micro tweeter) with custom unified crossover
  • Cable: 120 cm detachable, 3.5 mm stereo jack with included 6.3 mm adapter
  • Weight: 18.6 g (incl. cable) — light enough for hours-long wear
  • Construction: Closed-back, sound-isolating with no microphone and no active noise cancellation
  • Package: Cable, hardshell carrying case, cleaning tool, 6.3 mm adapter, earphone tips (3 sizes, silicone + memory foam)

Who Should Choose the Xvive T9

The T9 is the right choice for performing musicians, worship teams, and home-studio engineers who need pro-grade monitoring without the cost of custom molds. Bass players and drummers in particular benefit from the strong, clear low end — reviewers note the kick drum sits fat while overheads stay clean, and the bass guitar reads clearly without boom. The 3.5 mm jack plugs into any wireless beltpack, smartphone, or audio interface, and pairs naturally with the Xvive U4 wireless system for cable-free stage use.

Construction Method

Construction Method: Closed

These headphones feature a closed design that effectively isolates the listener from outside noise while preventing sound from escaping into the environment. As a result, you can enjoy your favorite music or podcasts without interference while not disturbing your surroundings. The sound of these headphones is full and thick with a distinctive bass.

Package Contents

Package Contents

  • Cleaning Tool
  • Carrying Case
  • Earphone Tips
  • Adapter 6,3 mm
  • Cable
Frequency Range

Frequency Range: 20 Hz - 16,5 kHz

The frequency response 20 Hz - 16,5 kHz provides a wide enough range to capture all the fine musical and sonic details.

Suitability

Тype

In-Ear

Size

Cable Length

1,2 m

Features

Microphone

No

Active noise cancellation

No

Number of Drivers

2

In-Ear Monitoring

Yes

Properties

Frequency Range

20 Hz - 16,5 kHz

Impedance

59 Ohm

Material

Construction Method

Closed

Connectors

Type-A Connector

Jack STEREO 3,5 mm Male

Acoustics

Sensitivity (dB)

120

Sensitivity

120 dB

Power supply

Battery Operation

No

Dimensions and Weight

Weight (g)

18.6

Country

Made in

USA

Documents

Instructions for use
Safety instructions

Please refer to the user manual for the specific safety instructions for this product.