- Тype: Active
- Woofer: 8"
- Tweeter: 1"
Turbosound iQ8 Active Loudspeaker
The Turbosound iQ8 is a compact 2,500W Class-D powered loudspeaker built around Klark Teknik DSP for portable PA and fixed installation. An 8-inch low-frequency driver pairs with a 1-inch compression driver to deliver clear, full-range sound in a lightweight fibre-glass composite enclosure. Onboard ULTRANET networking, SCC room-compensation, and speaker modelling make it a flexible tool for DJs, houses of worship, and live performers.
- 2,500W bi-amped Class-D power with Klark Teknik DSP for transparent limiting and dynamic EQ
- 8" LF driver with low-mass voice coil plus 1" compression driver for extended highs
- Built-in ULTRANET Cat 5 digital audio networking for clean multi-channel signal distribution
- Dual-angle pole mount, three M10 fly points, and PowerCON in/out for flexible deployment
Turbosound iQ8 Powered Loudspeaker — Compact 2,500W Workhorse
The Turbosound iQ8 is a 2,500-watt, two-way powered loudspeaker built for portable PA and fixed installations. An 8-inch low-frequency driver with a low-mass voice coil pairs with a 1-inch compression driver for full-range sound from a fibre-glass reinforced composite enclosure. A two-channel Klark Teknik Class-D amplifier drives both drivers bi-amped, while integrated DSP manages dynamic EQ, transparent limiting, and speaker modelling.
Klark Teknik DSP, SCC, and ULTRANET Networking
What separates this 8-inch cabinet from entry-level powered boxes is the onboard Klark Teknik DSP, which adds Spatial Contour Control (SCC) to compensate frequency response based on physical placement — wall, ceiling, corner, or pole. Speaker modelling loads accurate emulations of industry-standard loudspeakers, and ULTRANET digital audio networking streams up to 16 channels over a single Cat 5 cable to compatible mixers and personal monitoring systems.
Technical Parameters
The two-way driver complement, bi-amped Class-D power, and flexible I/O make this cabinet suitable for standalone use or pairing with a subwoofer such as the iQ15B or iQ18B.
- Total Power: 2,500 W Class-D bi-amped — headroom for live vocals, music playback, and DJ sets
- Maximum SPL: 128 dB — covers small-to-mid rooms without strain
- Frequency Range: 55 Hz – 20 kHz (-10 dB) — full-range response for music and speech
- Drivers: 8" LF with low-mass voice coil + 1" compression driver — clean transients and extended highs
- I/O & Mounting: 2 × XLR-Jack combo, USB, RJ45 ULTRANET; dual-angle 35 mm pole mount, 3 × M10 fly points, PowerCON in/out
Mobile DJs, Houses of Worship, and Small-Venue Performers
Mobile DJs, worship leaders, and small-venue performers will find this compact cabinet fits pole-mount, flown, and front-fill roles. The iQ8 is the right choice for anyone who needs a compact, high-output loudspeaker with built-in DSP. Solo musicians benefit from EQ presets (Live, Speech, Playback, Flat) and the feedback-killer DSP that learns and notches problem frequencies automatically. For installations in bars, clubs, and conference rooms, SCC room-compensation modes and ULTRANET networking keep cabling simple.
Turbosound and the iQ Series
Turbosound built its reputation on large-format touring loudspeakers and installed house-of-worship systems before expanding into compact powered cabinets with the iQ Series. The iQ8 brings that pro-audio heritage into a portable 8-inch format, pairing touring-grade reliability with the digital signal-processing expertise of sister company Klark Teknik.
Frequency Range: 55 Hz - 20 kHz
The frequency response 55 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 128 dB
High SPL levels up to 128 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Woofer: 8"
Thanks to 8" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Inputs
- RJ45
- USB
- XLR-Jack
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
EQ: Yes
The product is equipped with an equalizer that allows you to precisely adjust the sound to your personal preferences. With the ability to fine-tune different frequency bands, you can easily enhance or reduce specific frequencies to achieve the ideal audio experience tailored to your individual needs and preferences.
Тype
Power (Watt)
Frequency Range
Woofer
Tweeter
Display
Yes
Colour
Black
Package Contents
Power Cable
Battery Operation
No
Power Supply
100 - 240V
Height (cm)
45.7
Width (cm)
27.9
Depth (cm)
27.9
Net Weight (kg)
14.7
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
