Tech 21 SansAmp Marty Friedman Signature Preamp/Rack Amplifier
Brand: Tech 21
Product code: 1241159 (10013078)
Tech 21 SansAmp Marty Friedman Signature Preamp/Rack Amplifier
Brand: Tech 21
Product code: 1241159 (10013078)
- Тype: Programmable Preamp
- External FX Loop: Yes
- DI Output: Yes
Tech 21 SansAmp Marty Friedman Signature Preamp/Rack Amplifier
The Marty Friedman programmable Signature SansAmp comes preset with his main clean, dirty and lead tones. Operationally similar to the SansAmp PSA 2.0, there are two modes: Performance mode to have your 3 main presets at the ready and Studio mode for up to 128 locations for custom presets.
Storing and recalling programs is simple. You don’t need any special training or a degree in physics to operate your unit. The rotation of each control increases and decreases in a smooth, gradual, linear fashion, so when you turn a knob, you hear the difference immediately –in real time. You just set your tones and push the Save button. Yeah, it’s that easy.
In the studio, you can record direct, enhance existing tracks in mixdowns, as well as add interesting touches to any instrument. Live, the Marty Friedman Signature SansAmp can be used as a pre-amp direct into a power amp with speaker cabinets, as a “monster direct box” to a P.A. system (or both simultaneously), and as an outboard processor.
Controls include Reverb, 3-band active EQ, Drive and Level. There’s also an adjustable Gate that dynamically and smoothly cleans up the signal, rather than cutting it off abruptly. Filter alters the tonality by manipulating the mid-range and is specifically voiced for Marty’s unique sound.
As is the case with all of our signature artist gear, the Marty Friedman Signature SansAmp offers Marty’s core sounds and the versatility for many different styles.
CONTROLS & FEATURES
• DRIVE for gain and overdrive
• LOW, MID, HIGH are active tone controls that cut or boost from 12 o’clock, +/-12dB
• REVERB for the spatial ambiance of a well-balanced recording room
• GATE dynamically & smoothly cleans up your signal, rather than abruptly cutting it off
• FILTER alters the tonality by manipulating the mid-range and is specifically voiced for Marty’s unique sound
• Studio Mode for storing up to 128 presets
• Performance Mode to instantly access your 3 most often used presets
• BUILT-IN SPEAKER/CAB SIM: The SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar speaker cabinet system.
OTHER FEATURES
• Chromatic tuner
• Effect loop
• MIDI interface
• 1/4-inch 1megOhm input
• Low impedance XLR output with Ground Lift to go direct to a PA desk or studio board
• 1/4-inch low impedance output with Level Selector switch
Inputs
- Jack 6,3 mm TS
- MIDI IN Jack 3,5mm
Outputs
- MIDI OUT Jack 3,5mm
- Jack 6,3 mm TS
- Direct OUT (Balanced XLR)
Controls
- Gate
- Drive
- Low
- High
- Filter
- Save
- Reverb
- Mid
- Level
- Boost
External FX Loop: Yes
The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.
Reverb: Yes
The reverb effect allows you to simulate various acoustic environments, from small rooms to grand halls. Reverb is ideal for enhancing dynamics, adding space to recordings, or creating a unique sound environment during a live performance.
Tuner: Yes
The built-in tuner allows you to quickly and accurately tune instruments directly from the unit. This feature eliminates the need for additional tuning devices, increasing convenience and efficiency on stage or in the studio.
MIDI Interface: Yes
It supports MIDI, allowing you to connect and communicate with other MIDI-compatible devices. This feature extends control and integration into the larger music environment, increasing flexibility and creativity in music creation.
DI Output: Yes
Equipped with a DI output that allows direct and balanced transfer of the audio signal to mixers or recording devices without loss of quality. This output minimizes noise and interference, making it ideal for professional environments where it is important to maintain a clean and strong signal over extended connections. The DI output is ideal for both live performance and studio recording.
Тype
True Bypass
No
Number of Buttons
4
External FX Loop
Number of Effects
Tuner
Yes
MIDI Interface
Number of Presets
128, 3
Artist / Theme
Marty Friedman
Artist Signature
Yes
Inputs
Jack 6,3 mm TS, MIDI IN Jack 3,5mm
Outputs
Jack 6,3 mm TS, MIDI OUT Jack 3,5mm, Direct OUT (Balanced XLR)
Headphone Output
Footswitch Input Port
USB
DI Output
Package Contents
UK/EU Power supply included
Yes
Height (mm)
50.8
Width (mm)
190.5
Depth (mm)
133.35
Weight
0,68 kg
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
