Schaller Vintage Tremolo right Tremolo/Vibrato

Schaller Vintage Tremolo right Chrome — Strat-Style Replacement with Brass Sustain

The Schaller Vintage Tremolo right Chrome is a vintage-spec vibrato bridge built as a direct replacement for Fender Stratocaster tremolos and as a non-locking alternative on Floyd Rose-routed bodies. Its hardened steel baseplate and solid Pure Sound Brass block deliver the sustain of a classic six-screw design. The chrome-plated hardware ships complete with studs, bushings, claw, springs, and a choice of 32, 37, or 42 mm brass block.

What Sets the Vintage Tremolo Apart

Unlike most aftermarket six-screw bridges, this model pairs a hardened steel baseplate with a Pure Sound Brass block, adding mass where it matters most for sustain. The roller saddles hold each string in its optimum seating position, reducing friction during tremolo use and helping the guitar return to pitch after bends. The 74.3 mm post spacing lets the same bridge drop onto standard Strat routings and Floyd Rose-equipped bodies.

Dimensions and Fit

The geometry matches the original Fender specification, so installation requires no extra routing on a standard Strat body. Post spacing and string spread line up with factory setups.

• Post Spacing: 74.3 mm — matches Stratocaster and Floyd Rose routings
• String Spacing (E to E): 54 mm
• Press-In Bushing: 10 mm
• Slideway Intonation: 12.0 mm — enough travel for accurate saddle compensation

Materials and Construction

Schaller specifies hardened steel for the baseplate to keep the bridge rigid under string tension, and Pure Sound Brass for the block to add mass and resonance behind the saddles.

• Baseplate: Hardened steel — resists flex for consistent return-to-pitch
• Tremolo Block: Pure Sound Brass — adds mass for sustain
• Block Lengths: 32 mm / 37 mm / 42 mm — choose by tonal weight preference
• Block Mounting: Three screws spaced 21.5 mm apart

What's in the Box

The Vintage Tremolo right Chrome arrives as a complete installation kit, so no extra hardware is needed for a standard swap.

• Weight (Block 37 mm): 327 g
• Maximum String Gauge: .095 — supports light through heavy string sets
• Included Hardware: Tremolo claw, 2 × 4.2 × 45 mm screws, 3 springs, 2 mounting studs with bushings
• Finish: Chrome — matches standard Stratocaster hardware