- Shape: Elliptical
- Voltage: 8 mV
- Tracking Force: 2g - 4g
- Tracking ability at 315 Hz: 100 μm
- Frequency Range: 20 Hz - 20 kHz
Ortofon Concorde Club MKII Twin DJ Cartridge
The Ortofon Concorde MKII Twin Club is a pair of high-output DJ cartridges engineered for club DJs, broadcast studios, and vinyl archivists who demand the best possible sound from traditional vinyl playback. With its Special Elliptical stylus sitting deeper in the groove, more detail is extracted than spherical tips can reach.
- Special Elliptical stylus — greater groove contact area reveals intricate high-frequency detail
- 8 mV output voltage — requires less preamp gain, reducing noise and feedback susceptibility in live environments
- Ready for backup or dual-deck performances, the twin pack arrives in an aluminum flight case with both cartridges pre-installed with styli.
- 3 g tracking force — gentle on records during extended mixing sessions and archival transfers
Concorde MKII Twin Club — Studio-Grade Sound for the Booth
Few DJ cartridges extract as much detail from vinyl as the Ortofon Concorde MKII Twin Club. Built around a Special Elliptical stylus profile and an elevated 8 mV output, this twin-pack set delivers the clarity that club DJs, radio broadcasters, and vinyl archivists need when every harmonic matters. The package ships as two complete cartridges with pre-mounted styli housed in an aluminum flight case, ready to mount on any DJ turntable with a removable headshell.
What Sets the Club Apart from the Rest of the MKII Range
Within the entire Concorde MKII lineup, the Club is the only model equipped with an elliptical stylus rather than a spherical one. The Special Elliptical diamond fits deeper into the record groove, increasing the contact surface area and pulling out finer detail in the upper frequencies — a difference that becomes immediately audible on well-produced house, techno, and disco records. Combined with the 8 mV output, the signal arrives at the preamp hot and clean, requiring less amplification and therefore less noise.
Sound Performance and Output Specifications
The output voltage of a DJ cartridge determines how much gain the preamp must apply — and every decibel of gain adds potential noise. With its elevated signal level, the YRS-23 keeps the noise floor low, even in high-SPL booth environments where feedback is a constant threat.
- Output Voltage: 8 mV — reduces preamp gain requirements, yielding cleaner reproduction and lower feedback risk
- Accurate monitoring and archival transfers are enabled by the full audible spectrum coverage (20–20,000 Hz).
- Stylus Type: Special Elliptical — extended groove contact for superior high-frequency resolution compared to spherical alternatives
Tracking Force and Tonearm Compatibility
Tracking force directly affects both record wear and sound fidelity. Too much weight crushes the groove, while too little causes mistracking and skips. The Club's recommended tracking weight sits at a moderate level that preserves vinyl during long sets while maintaining stable groove lock.
- Tracking Force: 3.0 g — balanced between record preservation and reliable groove tracking during back-cueing
- Tonearm Compatibility: S-shaped tonearms only — the elliptical stylus geometry requires a curved arm for correct tracking angle; never mount on straight arms
- Weighing 18.5 g, this cartridge is compatible with virtually all DJ turntable headshells.
Twin-Pack Value and Package Contents
Professional DJs need redundancy — a blown stylus mid-gig is not an option. The Twin Club package addresses this by including two complete cartridges, each with a pre-installed stylus, packed in a protective aluminum flight case. When one stylus eventually wears, swap in the second cartridge and keep playing without interruption.
- Package Contents: 2 × Concorde MKII Club cartridges with pre-mounted styli, aluminum flight case
- Mounting: Standard Concorde mount — plugs directly into any removable headshell, no alignment tools required
- To extend the life of your setup, Stylus MKII Club replacements are available separately for cost-effective long-term maintenance.
Тype
Shape
Tracking Force
Tracking force recommended
3g
Colour
Frequency Range
Frequency Response
20 Hz - 20 kHz
Recommended load resistance
47 kOhm
Recommended load capacitance
200-600 pF
Tracking ability at 315 Hz
100 μm
Package Contents
Voltage
Weight
Made in
Japan
All reviews come from verified customers who have purchased a product from us in the past.
Documents
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
