- Woofer: 10"
- LF Driver Type: Glass Aramid Woofer
- Crossover Frequency (kHz): 27
- Power: 160W
- Frequency Range: 27 Hz - 156 Hz
- Sound Pressure Level (SPL): 117 dB
KRK S10.4 Studio Subwoofer
The KRK S10G4 is an active 10" studio subwoofer engineered to extend the low-end response of near-field monitors in project and home studios. A 160 W Class D amplifier drives a custom glass-aramid composite woofer down to 27 Hz, while the four-position crossover and footswitch-controlled bypass let engineers A/B the sub in and out of the signal chain during mix decisions.
- 10" glass-aramid composite woofer paired with a 160 W Class D amplifier for tight, controlled low end
- Four-position crossover (60/70/80/90 Hz) with matching high-pass filter on the monitor outputs
- Front-firing bass-reflex port in a reinforced MDF enclosure reduces boundary coupling near walls
- Universal I/O: balanced XLR, 6.3 mm TRS, unbalanced RCA, plus a footswitch input for hands-free bypass
KRK S10G4 — Active Studio Subwoofer for Extended Low End
The KRK S10G4 is an active studio subwoofer extending the low end of near-field monitoring setups. A 10" glass-aramid woofer and 160 W Class D amplifier deliver a maximum SPL of 117 dB with bass extension to 27 Hz. The reinforced MDF cabinet and front-firing port keep the cabinet stable. This model suits engineers working on electronic, hip-hop, and film-scoring projects.
What Sets This Sub Apart in Its Category
Unlike many entry-level subs, this unit includes a four-position crossover (60, 70, 80, 90 Hz) with a matching high-pass filter on the monitor outputs, preventing overlap and phase cancellation. The optional footswitch bypass routes full-range audio back to the monitors.
Driver and Amplification — Headroom and Control
The Class D amplifier keeps the cabinet light and cool while delivering the transient response needed for kick drums and sub-bass layers. The glass-aramid cone balances stiffness and damping so transients stay defined.
- LF Driver: 10" glass-aramid composite woofer — stiff, low-distortion cone for tight transients
- Amplifier Power: 160 W Class D — high headroom, low thermal load
- Max SPL: 117 dB — enough output for near-field and small-room monitoring
Frequency Range and Crossover — Tuning to Your Monitors
The crossover is the key integration point between sub and satellites. Polarity inversion, input sensitivity, and ground-lift switches dial out phase and hum problems.
- Frequency Range: 27 Hz – 156 Hz — extends below typical near-field monitor response
- Crossover: 60 / 70 / 80 / 90 Hz selectable — matches common 5"–8" monitor low-end limits
- HPF Bypass: via optional footswitch — instant A/B between full-range and sub-filtered monitoring
Connectivity and Physical Integration
Universal I/O lets the sub slot into almost any existing rig without adapter cables. The reinforced MDF enclosure and universal-voltage power supply make installation straightforward.
- Inputs: Balanced XLR, 6.3 mm TRS, RCA, footswitch — covers pro and consumer gear
- Outputs: XLR, 6.3 mm TRS, RCA — pass-through to monitors
- Dimensions: 341 × 479 × 310 mm, Weight: 15.88 kg — fits under most desks
Woofer: 10"
Thanks to 10" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Power: 160W
With power up to 160W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.
Frequency Range: 27 Hz - 156 Hz
The frequency response 27 Hz - 156 Hz provides a wide enough range to capture all the fine musical and sonic details.
Inputs
- Footswitch
- Unbalanced RCA
- Balanced XLR Female
- Balanced Jack 6.3 mm TRS
Sound Pressure Level (SPL): 117 dB
High SPL levels up to 117 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Тype
LF Driver Type
LF Driver Power Amp
Speakers
Controls
Volume, Polarity Switch, Ground/Lift Switch, Crossover Frequency, Input Sensitivity Switch, Stand-by Switch, Sub/HPF Bypass Footswitch
WiFi
Woofer
Tweeter
Crossover Frequency (kHz)
Power
Power (Watt)
Frequency Range
Crossover Frequency
Amplification configuration
Power RMS
Sound Pressure Level - SPL (dB)
Sound Pressure Level (SPL)
Package Contents
Manual, Power Cable
Power Supply
240V
Diameter (inch)
Diameter
Width (cm)
47.9
Height (cm)
34.1
Depth (cm)
31
Net Weight (kg)
16
Weight
16 kg
Made in
China
All reviews come from verified customers who have purchased a product from us in the past.
AI summary of reviews
Based on the number of reviews: 56
Strengths
- Powerful Bass: Customers consistently highlight the subwoofer's incredibly strong and deep bass, noting its ability to produce resonant and impactful low frequencies.
- Sound Quality: The sound is described as crystal clear and precise, with excellent bass definition, making it ideal for music production and critical listening.
- Studio Suitability: Many users recommend this subwoofer as an excellent choice for studio environments due to its accurate sound reproduction and powerful output.
- Ground Loop Elimination: The inclusion of a 'Ground Lift' switch is highly appreciated for effectively eliminating ground loop noise, particularly from GPUs.
- Performance at Low Volume: Despite its power, the subwoofer delivers impressive performance even at minimum volume settings, indicating efficient sound delivery.
Weaknesses
- Lack of Grille: One customer noted the absence of a protective grille, which could be a concern for some users.
- High Power for Small Spaces: Its significant power and ability to cause vibrations make it less suitable for small rooms or apartment buildings, as it can disturb neighbors.
What customers repeat
Verdict
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
