- Тype: 2 Bandwidth
- Power: 1500 W
- Woofer: 15"
- Tweeter: 1"
FBT X-Pro 115A Active Loudspeaker
The FBT X-Pro 115A is a 15" active two-way loudspeaker built for portable PA, mobile DJs, and small-to-medium live events. With 1200W of Class D low-frequency power and 300W for the highs, it pushes out 130 dB SPL from a plywood cabinet that weighs around 22 kg. Bluetooth 5.0 streaming, a 3-channel onboard mixer, and four DSP presets let a single operator run a full show without extra gear.
- Bi-amped output: 1200 W LF + 300 W HF Class D — delivers 130 dB peak SPL for full-range coverage
- 15" woofer with a 2.5" voice coil paired with a 1" compression driver — clean vocals and punchy bass without an external sub
- Bluetooth 5.0 plus a 3-channel mixer with XLR and 6.3 mm jack inputs — cable-free playback from phone or tablet
- Plywood cabinet with M10 rigging points, 35 mm pole socket, and 30°/45° monitor taper — flexible deployment on stand, flown, or as a wedge
FBT X-Pro 115A — 15" Active PA Speaker with Bi-Amp Power
The FBT X-Pro 115A is a bi-amplified active loudspeaker built for portable PA, mobile DJs, bands, and fixed installations. A 1200W Class D amp drives the 15" woofer while a separate 300W stage feeds the 1" compression driver, hitting 130 dB SPL across 42 Hz to 20 kHz. The FBT X-Pro 115A is the right choice for working musicians who want full-range sound, onboard mixing, and Bluetooth streaming in one road-ready enclosure.
What Sets the X-Pro 115A Apart
Most plastic-cabinet actives in this tier rely on ABS enclosures, but this model uses gas-injected moulded plywood with an anti-scratch coating and internal bracing for a warmer, more rigid sound. The 80° x 50° rotatable horn lets installers flip the dispersion for vertical or horizontal mounting, while four DSP presets shape the response for speech, music, or wedge-monitor use.
Technical Parameters — Power, Drivers, Connectivity
Bi-amped architecture and high-efficiency Class D stages give the cabinet real headroom for outdoor gigs and band rehearsals.
- Frequency Range: 42 Hz – 20 kHz — full-range response from sub-bass to air
- Max SPL: 130 dB — enough level for medium venues and outdoor events
- LF Driver: 15" woofer with 2.5" voice coil — deep, controlled low end
- Bi-amped Class D stages: 1200 W LF + 300 W HF — dedicated power for each driver band
- Inputs: XLR, 6.3 mm jack, Bluetooth 5.0 — mix mics, instruments, and wireless sources
Who the X-Pro 115A Is Built For
Mobile DJs running wedding and club sets, solo musicians and small bands needing a single-cabinet PA, and houses of worship or schools looking for a permanent install will all find a fit in the X-Pro 115A. The onboard 3-channel mixer accepts two mic/line sources plus a Bluetooth feed, so a performer can run vocal, instrument, and backing track without an external desk. Pair two cabinets wirelessly via True Wireless Stereo for wider coverage.
FBT — Italian Pro Audio Heritage
FBT is an Italian pro audio manufacturer whose X-Pro series shares its plywood-cabinet construction with the higher-tier PROMaxX and StageMaxx ranges. Made in Italy, the X-Pro 115A reflects FBT's focus on bi-amped active designs with integrated DSP for working musicians and installers.
Frequency Range: 42 Hz - 20 kHz
The frequency response 42 Hz - 20 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 130 dB
High SPL levels up to 130 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Woofer: 15"
Thanks to 15" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Inputs
- XLR
- Jack 6,3mm
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Bi-Amp
Yes
Multifunctional Housing
Yes
Pole Mount
Yes
DSP
Controls
Level (3 x), Preset
Bluetooth
Yes
WiFi
No
Power (Watt)
Power
Frequency Range
Woofer
Tweeter
Display
No
Colour
Black
Housing
Plywood Housing
Package Contents
Power Cable, Manual
Package Quantity (pcs)
1
Battery Operation
No
Power Supply
220V
UK/EU Power supply included
Yes
Height (cm)
73.55
Width (cm)
43.9
Depth (cm)
44
Weight
22 kg
All reviews come from verified customers who have purchased a product from us in the past.
AI summary of reviews
Based on the number of reviews: 18
Strengths
- Sound Quality: Customers consistently praise the clear, beautiful sound and deep bass produced by this speaker.
- Value for Money: Many customers feel that the product offers significant performance for its price, making it a top choice in its category.
- Overall Satisfaction: Customers express high levels of satisfaction with their purchase, often recommending the product to others.
What customers repeat
Verdict
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
