- Тype: Active
- Woofer: 15"
- Tweeter: 1"
dB Technologies KL 15 Active Loudspeaker
The dB Technologies KL 15 is a 2-way active loudspeaker built for portable PA, mobile DJs, and small live venues. Driven by an 800 W Class D/Class AB bi-amp, it pairs a 15" woofer with a 1" compression driver to deliver 128 dB SPL across a 48 Hz – 18 kHz range. Linear-phase FIR DSP, four selectable presets, and a 3-channel mixer with Bluetooth streaming make setup fast in any environment.
- 800 W peak bi-amp with Class D LF and Class AB HF stages provides clean, efficient power.
- Linear-phase FIR filters keep phase coherent across the venue so every listener hears the same mix.
- The 3-channel rear mixer features a combo XLR/Jack mic/line input, XLR/TRS line input, and Bluetooth wireless input.
- Polypropylene cabinet weighing 19.3 kg includes a 36 mm dual-angle pole mount and 45° wedge monitor sides.
dB Technologies KL 15 — Portable 15" Active PA Speaker with Bluetooth and DSP
The dB Technologies KL 15 is a 2-way active loudspeaker built for mobile DJs, solo performers, and small live venues that need serious output without complicated rigging. A 15" woofer and a 1" compression driver are pushed by an 800 W peak bi-amp, reaching 128 dB SPL while staying controlled. The cabinet ships with a padded cover and a dedicated cable pocket for organized transport between gigs.
Linear-Phase FIR DSP and a Self-Contained 3-Channel Mixer
What separates this model from typical 15" powered boxes is the linear-phase FIR filter engine running on a 20/56-bit DSP, which keeps phase response linear across the listening area for clearer vocals and tighter low end. Four front-panel presets — Playback, Flat, Bass Boost, and Wedge — adapt the voicing in seconds. The rear panel hosts a balanced combo XLR/Jack mic/line input, an XLR/TRS line input, and a Bluetooth receiver for wireless streaming, plus a switchable LINK/MIX XLR output.
Acoustic and Amplifier Specifications
The acoustic and amplifier chain is tuned for full-range use without a sub, while the dual-angle pole mount makes stacking on a subwoofer straightforward when more low end is needed.
- Frequency Response: 48 Hz – 18 kHz (-10 dB) — full-range coverage from kick drum to airy cymbals
- Max SPL: 128 dB — headroom for roughly 60–100 people per pair
- Amplifier Power: 800 W peak (Class D LF + Class AB HF) — bi-amped topology for accurate driver control
- HF Driver: 1" compression driver, 1.35" voice coil — handles the upper register with minimal distortion
- The 15" woofer with a 2.5" voice coil moves serious air to produce a deep, impactful low end.
Who this instrument is built for
This model is the right choice for mobile DJs, solo singer-songwriters, small bands, and venue operators who need a single self-powered cabinet that covers a 60–100 person room without external processing. Bluetooth streaming makes it equally useful for bars, restaurants, fitness studios, and conference hosts. The 19.3 kg polypropylene enclosure, three carrying handles, and dual-angle pole mount cup make load-in a one-person job, while the symmetrical 45° wedge sides let the same box double as a stage monitor.
Frequency Range: 48 Hz - 18 kHz
The frequency response 48 Hz - 18 kHz provides a wide enough range to capture all the fine musical and sonic details.
Sound Pressure Level (SPL): 128 dB
High SPL levels up to 128 dB allow you to experience the sound as it was originally intended, with sufficient volume and dynamics.
Woofer: 15"
Thanks to 15" bass woofer, you will enjoy deep, rich and dynamic bass that adds a new dimension to your sound. This woofer is specially designed to offer clean and precise bass performance.
Inputs
- Kombi XLR/Jack
- XLR/TRS kombi
- MIC/LINE
Bi-Amp: Yes
Bi-amping is a method of speaker wiring in which the treble and bass drivers are connected to separate amplifiers. This ensures that each driver receives the optimal amount of power, resulting in cleaner, more detailed and less distorted sound with better control and dynamics.
Pole Mount: Yes
The speaker-post mount is a reliable system for stable speaker installation. This system ensures optimal height and placement of the speaker for better acoustics and sound performance. Constructed of high-quality, impact-resistant material, the mount allows for easy installation and adjustment of the speaker position.
Bluetooth: Yes
Integrated Bluetooth technology enables wireless connectivity and easy pairing with a wide range of compatible devices. This connection method ensures convenient and efficient use without cables, contributing to greater flexibility and ease of use.
Microphone Input: Yes
The microphone input allows direct connection of a microphone for recording or amplifying voice or instruments.
Тype
Bi-Amp
Yes
Multifunctional Housing
No
Pole Mount
Yes
Speakers
1x 1'', 1x 15''
DSP
Controls
Volume (1 x)
Bluetooth
Yes
Housing
Polypropylene
Inputs
USB
No
Outputs
XLR Male
MP3 / Line In
Yes
Microphone Input
Yes
Power RMS (Watt)
400
Sound Pressure Level - SPL (dB)
Sound Pressure Level (SPL)
128 dB
Package Contents
Manual, Power Cable, Cover
Height (cm)
72.2
Width (cm)
43
Depth (cm)
40.2
Weight
19,3 kg
Made in
China
Documents
Instructions for use
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
