Boss WL-50 Wireless system
The Boss WL-50 Wireless Guitar System brings cable-free freedom to any pedalboard without the usual setup headaches. Its stompbox-sized receiver docks the transmitter for automatic pairing and charging, while selectable cable tone simulation preserves the natural warmth of a real guitar cable. With 2.4 GHz digital transmission, 2.3 ms latency, and a 65-foot range, players can roam the stage with no audible lag or dropouts.
- Plug-and-play 2.4 GHz wireless system in a stompbox-sized receiver that drops straight into a pedalboard chain.
- Integrated docking port charges the transmitter and pairs the connection in about 10 seconds
- Selectable cable tone simulation (short, long, bypass) replicates the natural treble roll-off of a passive pickup cable
- Up to 12 hours of transmitter playtime per charge, plus roughly 7 hours of receiver runtime on two AA batteries for mobile gigs
Wireless Guitar System for Pedalboards — Cable-Free Without the Hassle
The Boss WL-50 Wireless Guitar System is purpose-built for players who want to ditch the cable without rebuilding their pedalboard. Its stompbox-sized receiver sits at the start of the signal chain just like any other pedal, while the plug-in transmitter docks into the top of the unit for charging and automatic wireless pairing. This model is the right choice for guitarists who want pedalboard-friendly wireless freedom with zero menu-diving or channel scanning.
What Makes the WL-50 Different
Unlike most wireless units that need a separate rack receiver or a clip-on belt pack, this system integrates the transmitter dock directly into the pedal-format receiver. The DC output on the receiver doubles as a power distribution hub, letting a single BOSS PSA-S adaptor feed downstream pedals through an optional PCS-20A daisy-chain cable. Cable tone simulation with short, long, and bypass settings reproduces the natural capacitive effect of a real guitar cable, so passive-pickup players keep the familiar warmth of a wired rig.
Wireless Performance and Power Specs
The 2.4 GHz digital carrier and proprietary BOSS audio format deliver a stable signal with no audible compression, while the 2.3 ms latency keeps the playing feel indistinguishable from a hardwired cable. Power options cover both fixed and mobile setups, and the rechargeable transmitter removes the cost and waste of disposable batteries.
- Wireless Format: BOSS proprietary digital audio, 2.4 GHz carrier — automatic channel selection for rock-solid stability
- Latency: 2.3 ms — fast enough that playing feel matches a standard guitar cable
- Operating Range: 20 m (65 ft) line-of-sight — covers typical club and small-stage setups
- Frequency Response: 20 Hz – 20 kHz — full-range signal that preserves the guitar's natural character
- Dynamic Range: 110 dB or greater — wide headroom for clean tones and high-gain playing alike
- The transmitter features a rechargeable lithium-ion battery, offering up to 12 hours per charge to cover a full rehearsal or multi-set gig.
- Receiver Power: 9V DC 500 mA (PSA-S, sold separately) or 2 × AA batteries (~7 hours) — flexible for stage and street-gig use
- DC Output: distributes power to downstream pedals via PCS-20A daisy-chain — simplifies pedalboard wiring
- Simultaneous Systems: up to 14 in one space — safe for band use or multi-guitarist stages
- Receiver Dimensions: 72 × 121 × 56 mm, 220 g — slightly smaller footprint than a standard BOSS compact pedal
Who the Boss WL-50 Is Built For
Players running a multi-pedal rig on club stages, church platforms, or rehearsal rooms will appreciate the dock-and-go charging that keeps the transmitter topped up between sets. Home players tired of tripping over a long cable while practicing standing up will find the 65-foot range and ultra-low latency more than enough. Acoustic-electric and active-pickup players can switch the cable tone simulation off to keep their onboard preamp's character intact, while passive-pickup players get the choice of short or long cable emulation to match their usual wired feel.
System: 2,4 GHz
The 2.4 GHz system operates in a widely used frequency band, ideal for transmitting audio and data over short to medium distances. This system is commonly used in various wireless devices, offering stable communication. It is suitable for less critical applications where maximum resistance to interference is not essential.
Power Supply
Adapter
UK/EU Power supply included
No
Made in
China
Documents
Instructions for use
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
