Albania
Argentina
Australia
Austria
Bosnia and Herzegovina
Brazil
Bulgaria
Canada
Chile
Colombia
Croatia
Czech Republic
Denmark
Estonia
Finland
France
Germany
Ireland
Italy
Latvia
Lithuania
Luxembourg
Mexico
Moldova
Montenegro
Netherlands
New Zealand
North Macedonia
Norway
Philippines
Poland
Portugal
Romania
Serbia
Slovakia
Slovenia
South Africa
Spain
Sweden
Switzerland
Turkey
Ukraine
United Kingdom
United States of America
Blackstar Amped 1 Solid-State Amplifier
Brand: Blackstar
Product code: 1049083 (DEPT10-AMPED1)
Blackstar Amped 1 Solid-State Amplifier
Brand: Blackstar
Product code: 1049083 (DEPT10-AMPED1)
- Number of Channels: 2
- Built-in Effects: Yes
- External FX Loop: Yes
- Headphone Output: Yes
- Power: 100 W
- Battery Operation: No
Blackstar Amped 1 Solid-State Amplifier
Many guitarists are looking for innovative and above all portable solutions to amplify their pedalboards. Blackstar's goal was to develop a compact and powerful pedal amp that offers the same response and authentic "feel" as a real guitar amp.
Preamp section
The Voicing USA preamp section offers the amplification structures and sonic characteristics of classic American amps with the targeted and relatively clean response of a power amp. On the other hand, Voicing UK offers a typical British "Class-A" sound. Voicing Flat is the ideal choice when using the AMPED 1 in combination with an amp modeler. In this case, all amplification and equalizer structures of the AMPED 1 are excluded from the signal path, and the sounds of the modeler are reproduced neutrally with very high headroom.
Answers section
The Response controller offers five significantly different and authentic responses of the most famous power tube amplifiers - you can choose from KT88, 6L6, EL34, 6V6, EL84. Each setting offers the response, dynamics, compression and gain of the selected tube limiter. Voicing Linear provides transparent amplification without coloration that is v
in combination with the Voicing Flat section of the Preamp section, which is ideal for amplifying external models with their own tube circuit simulations.
Reverb section
The type of reverb, as well as its length and timbre, can be adjusted using Blackstar Architect software for in-depth editing and saved to AMPED 1 instead of the standard reverb. When Reverb is active, you can hold down the Reverb footswitch to activate the "Freeze" effect. When the Reverb footswitch is pressed and the "Freeze" effect is active, the reverb reverberates much longer, creating an effect similar to a synth pad.
Class D final grade
AMPED 1 features an innovatively designed power stage that responds to connected speakers just like a traditional tube amplifier. Thanks to the masterfully refined DSP design, the new Blackstar pedal amplifier offers an amazingly authentic sound, including all the nuances of a real tube amplifier.
Cabin Rig
For mic work on stage or in the studio, Blackstar's Cab Rig DSP speaker simulator is integrated, allowing for detailed adjustments. The Cab Rig signal can be sent to a mixer or DAW via a USB audio interface, mono XLR output or stereo Jack output.
- 100W guitar amplifier in a compact pedal.
- It turns any pedalboard, modeler or multi-effect into a performance-ready amp.
- The amplifier's unique high-headroom design automatically adjusts to speaker impedance, delivering maximum power and optimal tone with any cabinet setup.
- Response control is provided by five significantly different authentic power tubes - KT88, 6L6, EL34, 6V6, EL84.
- Each setting provides the response, dynamics, sag and cutoff characteristics of the selected amplifier tube. The linear response offers transparent gain performance that is used in combination with the Flat volume when pairing your AMPED 1 with an external modeling amp.
- Pro connectivity and integration into your setup using low latency USB audio as a tube interface for recording and XLR D.I. for live use.
- Effects loop, 2x 9V DC and MIDI control for easy integration into your pedalboard or setup.
- It features Cabrig, a next-generation DSP simulator that reproduces the sound and feel of a guitar cabinet mic in incredible detail.
- Capture your tones via USB / XLR output or headphones using the included free Architect software.
- A power reduction switch allows you to select 100W, 20W or 1W to easily achieve the perfect balance of power and response for any situation from the studio to the stage.
- Studio-quality reverb with a "freeze" effect.
- Footswitchable Preset with the possibility of switching.
Number of Channels: 2
This product has two channels, giving you the flexibility to connect two audio sources at once. This configuration allows you to combine different instruments and effects, enriching your sonic expression and giving you more variability.
Controls
- Master
- Middle
- Bass
- Reverb
- Preset
- Response
- Voice
- Power
- Treble
- Gain
External FX Loop: Yes
The Effect Loop makes it easy to connect external effects. This feature provides the ability to add and edit various sound effects without affecting the underlying signal. It's a great solution for musicians and sound engineers who need more flexibility and creativity in sound processing.
Headphone Output: Yes
The headphone output allows direct connection of headphones for private listening. This output provides a convenient way to enjoy the sound without disturbing others or ambient noise.
Reverb: Yes
The reverb effect allows you to simulate various acoustic environments, from small rooms to grand halls. Reverb is ideal for enhancing dynamics, adding space to recordings, or creating a unique sound environment during a live performance.
Power: 100 W
With power up to 100 W , you get plenty of headroom for impressive volume and dynamics whether you're in the studio, at home, or partying.
Тype
Number of Channels
External FX Loop
Number of Effects
Number of Input Ports
Limiter
MIDI Interface
Bluetooth
Rackmountable
Electronics
Power
Amp Simulations
Colour
Headphone Output
Inputs
Jack 6,3 mm TS (2 x), MIDI IN
Outputs
Jack 6,3 mm TS (2 x), Headphone Jack 6,3mm, USB C, XLR
Footswitch Input Port
USB
DI Output
Connection for External Speaker
Microphone Input
Package Contents
jack 3,5 mm TRS - 5 pin MIDI cable, Effect loop lead, USB-C - USB-A Cable
Weight
1,28 kg
Height (cm)
8.1
Width (cm)
20
Depth (cm)
14.9
Made in
China
Based on the number of reviews: 3
All reviews come from verified customers who have purchased a product from us in the past.
Hungary
Belgium
Greece
Documents
Manufacturer information
Safety instructions
Please refer to the user manual for the specific safety instructions for this product.
